Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Yellow plastic pendant enclosure with twelve 22 mm holes

SQUARE D

SQUARE D XACA12H7 Pendant Enclosure 12 Holes 22mm IP65 Yellow

SKU CH-FVJ8-G7RJC

Yellow plastic pendant enclosure with twelve 22 mm holes, IP65 and NEMA 4/4X rated for industrial control stations

  • Engine BrandSCHNEIDER ELECTRIC
  • 12-hole layout simplifies multi-control pendant builds
  • 22 mm cut-outs match standard industrial operators
  • IP65 and NEMA 4/4X ratings protect against dust and water jets
  • Yellow plastic housing ensures high visibility in harsh areas
  • Cable sleeve accepts 0.31 in to 1.02 in entries for flexible wiring

Product identity

The SQUARE D XACA12H7 is a yellow plastic pendant enclosure designed for industrial control stations. It provides twelve 22 mm mounting holes for push buttons, selector switches or pilot lights in a single housing. The IP65 rating and NEMA 4/4X classification make it suitable for wet, dusty or wash-down environments. It is intended for panel builders and maintenance teams assembling pendant-mounted operator interfaces.

Installation notes

The enclosure accepts cable diameters from 0.31 in to 1.02 in through the supplied cable sleeve, so the gland area must match the incoming cable. All twelve holes are pre-drilled to 22 mm; no additional cut-outs are required unless the application needs fewer devices. The plastic body is lightweight but can crack if overtightened, so use hand tools only. Verify that the mounting surface can support the assembled station before final tightening.

Decisive specification

The twelve 22 mm holes fix the maximum number of operators that can be fitted in one pendant. If the control scheme requires more than twelve devices, this enclosure cannot accommodate them and a larger or multi-station solution is needed. The IP65 and NEMA 4/4X ratings confirm suitability for hose-directed water and corrosion-resistant duty.

Kohokohdat

  • 12-hole layout simplifies multi-control pendant builds
  • 22 mm cut-outs match standard industrial operators
  • IP65 and NEMA 4/4X ratings protect against dust and water jets
  • Yellow plastic housing ensures high visibility in harsh areas
  • Cable sleeve accepts 0.31 in to 1.02 in entries for flexible wiring

Tekniset tiedot

Engine BrandSCHNEIDER ELECTRIC

Kysymyksiä tästä tuotteesta

How can I verify the pendant enclosure meets IP65 protection after installation?

Confirm the cable entry diameter stays within 0.31 in to 1.02 in, seat the supplied cable sleeve fully, and check that all 12 holes at 22 mm are either fitted with operators or sealed so the yellow plastic housing maintains its NEMA 4 and 4X rating.

What components are included and what must I source separately?

The enclosure ships with the yellow plastic body and a cable sleeve; you must supply 22 mm pushbuttons, selector switches, pilot lights or blanking plugs for the 12 holes and any wiring or mounting hardware required for your application.

Which version should I choose if I need a different number of operator positions?

This model provides exactly 12 holes at 22 mm spacing; if your control station requires fewer or more positions, select a pendant enclosure with the matching hole count from the same XACA series.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.