Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular USB-C card reader with brushed aluminum housing, SD, microSD and CompactFlash slots

STARTECH

STARTECH FCREADU3C 3-in-1 USB-C 3.0 card reader SD microSD CompactFlash

SKU CH-8K4F-BJWQ8 MPN FCREADU3C

Read SD, microSD and CompactFlash cards on any USB-C device at 5 Gbit/s, no drivers required

  • Type3-in-1
  • Slots1 x Micro-SD 1 x SD / MMC 1 x CF (Compact Flash I/II Card)
  • Installation TypeExternal
  • ColorSilver
  • Interface1 x USB Type-C (24 pin) USB 3.0 Receptacle - 5 Gbit/s
  • CompatibilityOS Compatibility: OS independent; No software or drivers req
  • Read SD, microSD and CompactFlash cards on USB-C devices
  • USB 3.0 interface delivers 5 Gbit/s transfer speeds
  • Compact 0.60" x 2.50" x 2.70" design fits any bag
  • Works instantly with no drivers on any operating system
  • Backward compatible with USB 2.0 ports

USB-C 3.0 card reader for mobile workflows

The StarTech FCREADU3C connects SD, microSD and CompactFlash cards to any USB-C device at 5 Gbit/s. It draws power from the host so no external supply is needed. Photographers and videographers can offload footage directly to a laptop, tablet or smartphone without driver installation. The reader suits field work where multiple card formats are used.

Plug-and-play setup with one common snag

Insert the reader into a USB-C port and the operating system recognises it immediately — Windows, macOS, Linux, Chrome OS, Android and iPadOS are all supported. The only frequent issue is a loose fit on recessed ports; a short USB-C extension cable solves it. No firmware updates or configuration utilities are required.

Steady throughput during long offloads

Sustained transfers of large RAW batches or 4K clips hold close to the USB 3.0 bulk-endpoint limit without throttling. The aluminium housing acts as a passive heatsink, keeping the controller stable during multi-gigabyte writes. Performance drops only when the host controller shares bandwidth with other high-demand peripherals.

Kohokohdat

  • Read SD, microSD and CompactFlash cards on USB-C devices
  • USB 3.0 interface delivers 5 Gbit/s transfer speeds
  • Compact 0.60" x 2.50" x 2.70" design fits any bag
  • Works instantly with no drivers on any operating system
  • Backward compatible with USB 2.0 ports

Tekniset tiedot

BrandStarTech.com
ModelFCREADU3C
Type3-in-1
Slots1 x Micro-SD
1 x SD / MMC
1 x CF (Compact Flash I/II Card)
Installation TypeExternal
ColorSilver
Interface1 x USB Type-C (24 pin) USB 3.0 Receptacle - 5 Gbit/s
CompatibilityOS Compatibility: OS independent; No software or drivers required
Support - Compact FlashCF (Compact Flash I/II Card)
Support - SDSD/MMC (Secure Digital/Multimedia Card)
SDHC (Secure Digital High Capacity)
SDXC (Secure Digital eXtended Capacity)
Micro-SD (Micro Secure Digital)
Micro-SDHC (Micro Secure Digital High Capacity)
Micro-SDXC (Secure Digital eXtended Capacity)
Dimensions0.60" x 2.50" x 2.70"
FeaturesTransfer photos, videos, music and other files to and from your memory card to your USB-C enabled tablet, laptop, smartphone or desktop computer
Multi-card flash reader and writer supports Secure Digital, microSD and CompactFlash cards
Supports USB 3.0 with data transfer speeds up to 5Gbps (USB powered)
Thunderbolt 3 USB-C port compatible
Compact, portable design with stylish brushed-aluminum housing
Backward compatible with USB 2.0
No driver or software installation required
Package Contents1 x multi-card reader and writer
1 x quick-start guide
Lähetyspaino0.10 kg
Pakkauksen mitat125 × 100 × 25 mm

Kysymyksiä tästä tuotteesta

How can I verify the FCREADU3C is working correctly after connecting it to my USB-C device?

The reader requires no drivers or software; when a supported SD, microSD or CompactFlash card is inserted, the host device should recognise it immediately and allow file transfer.

What comes in the box with the FCREADU3C and what must I provide separately?

The package includes the multi-card reader and a quick-start guide; you must supply your own USB-C cable and the memory cards you wish to read.

Which card types does the FCREADU3C support so I know it matches my media?

It accepts SD, SDHC, SDXC, microSD, microSDHC, microSDXC and CompactFlash I/II cards through its three dedicated slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.