Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black trayless hot-swap mobile rack for 3.5in SATA drive in 5.25in bay

STARTECH

STARTECH HSB100SATBK 5.25in Trayless Hot Swap Mobile Rack for 3.5in SATA Drive ssd accessory

SKU CH-FSAN-MXHZ0 MPN HSB100SATBK

A trayless hot-swap bay that fits one 3.5in SATA drive into a 5.25in bay

  • ColorBlack
  • Mobile Rack Drives Support1 x 3.5" Drives to 5.25" Bay
  • Mobile Rack InterfaceSATA I/II
  • SpecificationsBus Type: SATA I (SATA 150), II (SATA /300) Maximum Data Tra
  • FeaturesHot-swap any 3.5in SATA hard drive easily from any computer

Model Trayless

  • Rugged
  • Trayless

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Hot-swap 3.5" SATA drives without tools via trayless 5.25" bay
  • Fits one 3.5" SATA drive into a standard 5.25" front bay
  • Hot-swap capable SATA I/II backplane supports 3.0 GBytes/s transfer
  • Simple drive removal by opening the front panel door
  • Black internal enclosure designed for 3.5" SATA hard drive installation

5.25in Trayless Hot-Swap Bay

This tray-less mobile rack fits a single 3.5in SATA drive into a standard 5.25in front bay. It provides a simple way to add or remove storage without tools or a separate carrier tray. The enclosure connects via an internal SATA I/II backplane and supports hot-swap operation on compatible systems. It is aimed at system builders and technicians who need quick drive access for maintenance or data transfer.

Replaces Fixed Internal Mounts

The unit replaces a fixed 3.5in drive cage or a screw-mounted tray that requires opening the chassis side panel. The jump is worthwhile when drives must be swapped frequently for backups, imaging or multi-OS workflows. It is not suited for users who need more than one drive in the same bay or who require the higher throughput of a SATA 6 Gbps interface. Buyers who want more storage density should consider a multi-bay solution instead.

Limited to SATA I/II Speeds

The backplane is specified for SATA 150 and SATA 300 signalling, capping maximum data transfer at 3.0 GBytes/s. Drives that support faster SATA revisions will operate at this lower ceiling when installed in the rack. Hot-swap functionality also depends on the host controller and operating system support; it will not work on platforms that lack native hot-plug capability. Systems requiring sustained throughput above this limit will see reduced performance.

Kohokohdat

  • Hot-swap 3.5" SATA drives without tools via trayless 5.25" bay
  • Fits one 3.5" SATA drive into a standard 5.25" front bay
  • Hot-swap capable SATA I/II backplane supports 3.0 GBytes/s transfer
  • Simple drive removal by opening the front panel door
  • Black internal enclosure designed for 3.5" SATA hard drive installation

Tekniset tiedot

BrandStarTech.com
ModelHSB100SATBK
ColorBlack
Mobile Rack Drives Support1 x 3.5" Drives to 5.25" Bay
Mobile Rack InterfaceSATA I/II
SpecificationsBus Type: SATA I (SATA 150), II (SATA /300)
Maximum Data Transfer Rate: 3.0 GBytes/s
FeaturesHot-swap any 3.5in SATA hard drive easily from any computer with a 5.25in bay. This 3.5in SATA hard drive hot-swap bay allows you to install a 3.5in SATA drive in an available/unused 5.25in drive bay. To remove the drive, it's as simple as opening the front panel door; to re-insert a drive, simply insert the drive (connector first) until the door closes.
The hot swap bay offers a trayless design that makes it the ideal solution for quick and easy drive removals and insertions as part of a system building process, or integration into rackmount systems or industrial environments.
To ma
Lähetyspaino0.37 kg
Pakkauksen mitat208 × 157 × 52 mm

Kysymyksiä tästä tuotteesta

Will this mobile rack fit in a standard 5.25in front drive bay?

Yes, it mounts in any 5.25in bay and accepts one 3.5in SATA drive with no tray required.

How do I install a drive without a tray, and what step is often missed?

Slide the 3.5in SATA drive straight in until the front door latches; the step often missed is pushing firmly until the connector seats on the internal SATA backplane.

Does the SATA I/II backplane limit the speed of a modern 6 Gb/s SSD?

The backplane tops out at 3.0 GBytes/s, so a 6 Gb/s SSD will run at SATA II speeds.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.