Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Red PCIe add-in card with four USB-C ports and a SATA power connector

STARTECH

STARTECH P10Q4C-USB-CARD 4-port USB 3.2 10Gbps PCIe 3.0 expansion card

SKU CH-DRRX-D2NJE MPN P10Q4C-USB-CARD

Adds four USB-C ports running at 10 Gbps each with independent controllers and 15 W power delivery via SATA

  • TypeUSB CardBus
  • Package ContentsUSB Adapter 1 x Low-Profile Bracket 1 x Quick-Start Guide
  • Four independent USB controllers eliminate bandwidth sharing
  • Each USB-C port delivers up to 10 Gbps data speed
  • PCIe 3.0 interface provides high-throughput host connection
  • SATA auxiliary power supplies 15 W per port
  • Compatible with Windows, Linux and macOS systems

Four independent USB-C controllers

This PCIe 3.0 add-in card adds four USB 3.2 Gen 2 Type-C ports to a desktop or server. Each port is driven by its own controller so bandwidth is not shared between devices. The card suits users who need multiple simultaneous 10 Gbps connections for external storage or high-performance peripherals. It supports Windows, Linux and macOS without extra drivers.

Auxiliary SATA power delivers 15W per port

A SATA power connector supplies up to 15W to each port so bus-powered drives and accessories run without external adapters. The plug-in form factor draws power only from the slot and the auxiliary connector keeping cable routing simple. Independent controllers help maintain consistent throughput under load while the low-profile bracket fits compact chassis.

Red PCB with low-profile bracket included

The red circuit board makes the card easy to identify inside a busy build. A low-profile bracket is supplied for small-form-factor cases while the standard bracket works in full-size towers. Four Type-C ports face the rear panel giving clean access for cables and docks. No internal headers or extra cabling are required.

Kohokohdat

  • Four independent USB controllers eliminate bandwidth sharing
  • Each USB-C port delivers up to 10 Gbps data speed
  • PCIe 3.0 interface provides high-throughput host connection
  • SATA auxiliary power supplies 15 W per port
  • Compatible with Windows, Linux and macOS systems

Tekniset tiedot

BrandStarTech.com
ModelP10Q4C-USB-CARD
Part NumberP10Q4C-USB-CARD
TypeUSB CardBus
Package ContentsUSB Adapter
1 x Low-Profile Bracket
1 x Quick-Start Guide
Lähetyspaino0.45 kg
Pakkauksen mitat152 × 127 × 51 mm

Kysymyksiä tästä tuotteesta

How do I install the card and which bracket do I use for a low-profile case?

Install the card into a PCIe 3.0 x4 or larger slot, attach the included low-profile bracket, then connect the auxiliary SATA power cable to supply 15W per port before booting the OS.

What maintenance or replacement will the card need over time?

No scheduled maintenance is required; only the auxiliary SATA power connection and the four USB Type-C ports may need attention if cables wear or the power supply cannot sustain 15W per port.

What limit appears first when all four ports run sustained 10Gbps transfers?

The PCIe 3.0 host link and the shared SATA power feed become the bottlenecks before any single 10Gbps controller reaches its own ceiling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.