SUPER TALENT
SUPER TALENT DX3 256GB M.2 SATA internal SSD
A 256 GB M.2 SATA internal SSD with 3D TLC NAND delivering up to 480 MB/s read and 400 MB/s write speeds
- 256 GB capacity fits large game libraries and media collections
- Sequential read up to 480 MB/s loads applications quickly
- Sequential write up to 400 MB/s saves large files fast
- M.2 2280 form factor installs in slim laptops and desktops
- 1500 G shock rating protects data during drops and transport
SATA M.2 2280 256 GB internal SSD
This SUPER TALENT DX3 drive delivers 256 GB of storage in an M.2 2280 form factor using a SATA interface. It fits laptops and desktops with an M.2 SATA slot and draws power from a 3.3 V rail. Sequential reads reach up to 480 MB/s and writes up to 400 MB/s.
Suits SATA-only M.2 slots; not for PCIe-only slots
Builders whose motherboard provides an M.2 socket wired for SATA can use this drive directly. Systems with M.2 slots that support only PCIe signalling will not recognise the device. Buyers needing higher sequential throughput or larger capacities should consider other options.
3D TLC NAND with 1500 G shock rating
The drive uses 3D TLC flash memory and is rated for 1500 G operating shock and 16 G operating vibration. Access time is 0.2 ms and the module measures 22.0 x 80.0 x 3.5 mm.
Kohokohdat
- 256 GB capacity fits large game libraries and media collections
- Sequential read up to 480 MB/s loads applications quickly
- Sequential write up to 400 MB/s saves large files fast
- M.2 2280 form factor installs in slim laptops and desktops
- 1500 G shock rating protects data during drops and transport
Tekniset tiedot
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Kysymyksiä tästä tuotteesta
Will the 2280 M.2 drive fit in a slot limited to 3.5 mm thickness?
Yes, the drive measures 22.0 x 80.0 x 3.5 mm, so it matches the standard 2280 footprint and stays within a 3.5 mm height limit.
Does the SATA3 interface need a separate power cable during installation?
No, the drive draws power directly from the M.2 socket at 3.3V ±5%; no extra power cable is required.
How long before the 3D TLC NAND might need replacement under typical write loads?
The 3D TLC NAND is rated for standard endurance; with 256 GB capacity and sequential writes up to 400 MB/s, typical consumer workloads last several years before wear becomes a concern.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
