Supermicro
Supermicro MBDX11SCHFO server motherboard C246 XEON LGA1151
Server motherboard with Intel C246 chipset, dual Intel i210 LAN ports, and two PCI-E 3.0 x8 expansion slots
- Intel C246 chipset supports Xeon E processors
- LGA1151 socket fits Coffee Lake Xeon CPUs
- Dual Intel I210 Gigabit LAN ports for redundancy
- Two PCIe 3.0 x8 slots enable expansion cards
- Five USB 3.1 ports plus six USB 2.0 ports
Server motherboard for Xeon E
The Supermicro MBDX11SCHFO is a server motherboard built around the Intel C246 chipset and LGA1151 socket. It supports the Xeon E processor family for entry-level server and workstation deployments. The board is supplied new and ready for integration into compatible chassis.
Suited for single-socket builds
This board fits administrators assembling a single-processor server that needs dual Intel i210 gigabit LAN ports and a modest PCIe layout. It is not intended for dual-socket configurations or systems requiring more than two x8 expansion slots. Buyers needing additional network interfaces or full-length x16 slots should consider other platforms.
Connectivity and expansion included
Rear I/O provides two USB 3.1 Gen 2 ports and two USB 2.0 ports. Internal headers add three USB 3.1 Gen 1 ports and four USB 2.0 ports. Expansion consists of one PCIe 3.0 x8 slot in an x16 form factor and a second PCIe 3.0 x8 slot. Dual gigabit Ethernet is provided by the onboard Intel i210 controllers.
Kohokohdat
- Intel C246 chipset supports Xeon E processors
- LGA1151 socket fits Coffee Lake Xeon CPUs
- Dual Intel I210 Gigabit LAN ports for redundancy
- Two PCIe 3.0 x8 slots enable expansion cards
- Five USB 3.1 ports plus six USB 2.0 ports
Tekniset tiedot
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Kysymyksiä tästä tuotteesta
Which processor socket must I already have to install this motherboard?
The board uses the LGA1151 socket, so you need a compatible Intel Xeon E processor for that socket.
Will my existing Intel i210-based network cards work alongside the two onboard GbE ports?
Yes, the dual onboard Intel i210 GbE ports operate independently, so additional i210 cards will function without conflict.
How can I verify the two rear USB 3.1 Gen 2 ports are running at full speed after assembly?
Connect a USB 3.1 Gen 2 device and check the operating system reports a 10 Gbps link for those ports.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



