Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

SXDOOL

SXDOOL 45mm Case Fan 12V 2.3W 2-Pin Black

SKU CH-74CC-RC5GW

A 45 mm diameter case fan with 32 mm mounting holes, 12 V DC power and a 2-pin connector rated at 2.3 W

  • Fan Size45mm
  • ColorBlack
  • Compact 45 mm frame fits tight GPU or server slots
  • 12 V DC power runs from standard motherboard headers
  • Low 2.3 W draw keeps system power budget low
  • 32 mm mounting holes match common 45 mm fan patterns
  • Two-pin connector enables simple plug-and-play installation

45 mm 12 V Case Fan

This 45 mm black fan runs on 12 V and draws 2.3 W through a 2-pin connector. It matches the SUNON 125010VX-A and POWER LOGIC PLD05010S12HH form factor. The compact frame suits tight server or graphics-card cooling slots where a 45 mm diameter is required. Buyers needing larger airflow or PWM control should look elsewhere.

Installation Notes

The fan uses a standard 2-wire 2-pin plug that connects directly to a 12 V header. Mounting holes are spaced on a 32 mm circle, so verify the hole pattern before fastening. No speed signal wire is present, so the motherboard cannot monitor RPM. Over-tightening screws on the thin frame can crack the plastic housing.

Compatibility Check

Confirm the mounting surface has a 45 mm diameter cut-out and a 32 mm hole pitch. Ensure the power header supplies 12 V DC and accepts a 2-pin plug without a keying notch. Check that the 2.3 W draw fits within the header’s current limit. The fan has no PWM pin, so it will run at full speed continuously.

Kohokohdat

  • Compact 45 mm frame fits tight GPU or server slots
  • 12 V DC power runs from standard motherboard headers
  • Low 2.3 W draw keeps system power budget low
  • 32 mm mounting holes match common 45 mm fan patterns
  • Two-pin connector enables simple plug-and-play installation

Tekniset tiedot

Fan Size45mm
ColorBlack

Kysymyksiä tästä tuotteesta

How can I confirm the SXDOOL 45mm fan is running correctly after connecting the 2-pin plug?

With power applied the blades should spin smoothly and quietly; you can also feel a steady airflow through the 32 mm mounting holes and verify the motor draws roughly 2.3 W at 12 V.

What comes in the box and what extra parts are needed to install the SUNON 125010VX-A on a graphics card?

The package contains only the 45 mm black fan with its 2-wire 2-pin lead; you must supply 3.2 cm mounting screws or clips and a 12 V DC header or adapter on the card.

Which version of the 45 mm case fan should I choose if my graphics card uses the POWER LOGIC PLD05010S12HH mounting pattern?

Select the SUNON 125010VX-A model — it matches the 45 mm diameter, 32 mm hole spacing, 12 V 2.3 W rating and 2-pin connector used by that POWER LOGIC reference.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.