Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

SXDOOL

SXDOOL MC35101V2-000C-A99 35 mm 12 V 0.52 W 7200 RPM case fan

SKU CH-T3TK-WRPY1 MPN MC35101V2-000C-A99

A 35 mm 12 V case fan spinning at 7200 RPM with 6.5 CFM airflow and 22 dBA noise, fitted with a 2.0 2-pin connector and 4 cm leads

  • Compact 35 mm frame fits tight builds
  • 7200 RPM airflow delivers 6.5 CFM cooling
  • Quiet 22 dBA operation suits silent PCs
  • 12 V 0.52 W draw keeps power low

Compact 35 mm 12 V case fan for tight spaces

This SXDOOL MC35101V2-000C-A99 fan measures 35 by 35 by 10 mm and runs on 12 V DC power. It spins at 7200 RPM with a tolerance of ten percent and draws 0.52 W. The two-pin 2.0 connector and 4 cm wire suit small-form-factor chassis and replacement jobs where clearance is minimal.

Replaces louder or failed 35 mm two-pin fans

If an existing 35 mm cooler runs above 22 dBA or has stopped spinning, this unit drops the noise floor while delivering 6.5 CFM airflow. The jump is worth it when the original fan uses the same 2.0 two-pin header and the 4 cm lead reaches the board without extension cables. Builders needing higher static pressure, PWM control or a longer cable should look elsewhere.

Kohokohdat

  • Compact 35 mm frame fits tight builds
  • 7200 RPM airflow delivers 6.5 CFM cooling
  • Quiet 22 dBA operation suits silent PCs
  • 12 V 0.52 W draw keeps power low

Tekniset tiedot

BrandXCLIO

Kysymyksiä tästä tuotteesta

What are the mounting hole dimensions for the 35 mm frame?

The fan body measures 35 x 35 x 10 mm, so mounting holes suit a 35 mm square pattern.

How do I connect the 2.0 2-pin plug to a standard motherboard header?

Insert the 2-pin connector onto the two outer pins of a 3-pin or 4-pin fan header; the 4 cm lead reaches most nearby headers.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.