Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Three black 120mm DC fans with sickle blades, an adjustable AC-to-DC controller and a three-way splitter cable shown together

SXDOOL

SXDOOL SXD12025 3IN1 3-Fan DC Cooling Kit 120x120x25mm

SKU CH-TRJR-G2ZAP

Three 120 mm dual-ball-bearing fans with adjustable 3–12 V DC control deliver 48–94.5 CFM each for mining rigs and equipment cabinets

  • Adjustable 3-12V DC power from 100-240V AC adapter for safe low-voltage fan operation
  • Three 120x120x25mm fans with 105mm mounting spacing fit standard mining rig bays
  • Per-fan airflow scales from 48 CFM at 3V to 94.5 CFM at 12V for targeted cooling
  • Dual ball bearing and seven sickle blades deliver 1100-3200 RPM speed range with 18.8-38.5 dBA noise
  • Complete kit includes 3-way splitter cable and 230mm leads for simple 5.5x2.1mm DC connection

Complete 3-Fan DC Cooling Kit

The SXDOOL SXD12025 3IN1 kit contains three 120x120x25mm DC fans, an adjustable 100-240V AC-to-DC adapter rated up to 2A, and a 3-way splitter cable. It is built for targeted airflow in BTC mining rigs, workstation cabinets, and equipment enclosures where the mounting pattern and connector match. Each fan uses a 5.5x2.1mm DC connector and a 230mm lead.

Adjustable Speed Replaces Fixed-Flow Fans

Unlike single-speed fans, this kit lets you set the adapter output between 3V and 12V to match cooling needs. At 3V a fan runs at 1100 RPM delivering 48 CFM at 18.8 dBA; at 12V it reaches 3200 RPM and 94.5 CFM at 38.5 dBA. The jump is worth it when noise tolerance or thermal headroom changes across deployments.

For Builders Who Can Verify Fit And Polarity

This kit suits installers who can confirm 105mm hole spacing, 4.3mm mounting holes, correct connector polarity, and adequate adapter headroom for three fans. It is not for buyers who need PWM motherboard control, larger frame sizes, or fans rated for direct AC mains connection.

Kohokohdat

  • Adjustable 3-12V DC power from 100-240V AC adapter for safe low-voltage fan operation
  • Three 120x120x25mm fans with 105mm mounting spacing fit standard mining rig bays
  • Per-fan airflow scales from 48 CFM at 3V to 94.5 CFM at 12V for targeted cooling
  • Dual ball bearing and seven sickle blades deliver 1100-3200 RPM speed range with 18.8-38.5 dBA noise
  • Complete kit includes 3-way splitter cable and 230mm leads for simple 5.5x2.1mm DC connection

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Will the fans fit a standard 120 mm mounting grid?

Each fan measures 120 x 120 x 25 mm with 105 mm hole spacing and 4.3 mm mounting holes, matching the common 120 mm pattern.

Can I run the fans directly from a wall socket?

No. The fans are DC devices and must be powered through the included adapter, which accepts 100-240 V AC and supplies adjustable 3-12 V DC up to 2 A.

How loud are the fans at the highest setting?

At 12 V each fan runs at 3200 RPM, delivers 94.5 CFM and produces 38.5 dBA according to the reference data.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.