SXDOOL
SXDOOL TD4010X-H-12-BPLL 40mm 12V case fan
40 mm 12 V case fan spins at 6500 RPM, delivers 4.15 CFM airflow at 27 dBA using a 3-pin connector
- Fan Size40mm
- RPM6000-6499 RPM
- Air Flow1-5 CFM
- Noise Level25 - 30 dBA
- Power Connector3 Pin
- ColorBlack
- Compact 40×40×10 mm footprint fits tight chassis
- 12 V, 0.09 A draw keeps power use low
- 6 500 RPM peak speed moves 4.15 CFM airflow
- 27 dBA acoustic rating runs quietly under load
- Three-pin connector enables direct motherboard control
Compact 40mm frame
The SXDOOL TD4010X-H-12-BPLL is a 40mm square case fan built for tight mounting points in small-form-factor chassis or industrial enclosures. It draws 12V at 0.09A and delivers 1.08W of cooling power for targeted airflow.
Airflow limited to 4.15 CFM
At 6500 RPM the fan moves only 4.15 CFM, so it suits spot cooling of voltage regulators, chipset heatsinks or drive cages rather than whole-case ventilation. Acoustic output sits between 25 and 30 dBA, reaching 27 dBA at rated speed.
Three-pin power, no lighting
A standard three-pin connector supplies power and tachometer feedback without PWM control. The black non-LED frame keeps the unit visually neutral, while the 10mm thickness fits the common 4010 mounting pattern.
Kohokohdat
- Compact 40×40×10 mm footprint fits tight chassis
- 12 V, 0.09 A draw keeps power use low
- 6 500 RPM peak speed moves 4.15 CFM airflow
- 27 dBA acoustic rating runs quietly under load
- Three-pin connector enables direct motherboard control
Tekniset tiedot
| Fan Size | 40mm |
|---|---|
| RPM | 6000-6499 RPM |
| Air Flow | 1-5 CFM |
| Noise Level | 25 - 30 dBA |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
Kysymyksiä tästä tuotteesta
Is the 40 mm TD4010X-H-12-BPLL the only size option available?
This model is a single 40×40×10 mm unit; no other frame sizes or capacity variants are offered for the TD4010X-H-12-BPLL.
What does the 6 500 RPM rating mean for actual airflow inside my case?
At 6 500 RPM the fan moves 4.15 CFM, delivering a focused stream suited to tight spots such as GPU heatsinks or small-form-factor chassis.
How does the 3-pin connector affect speed control on a modern motherboard?
The 3-pin header allows voltage-based regulation; the board can vary the 12 V supply to adjust speed between the 6 000–6 499 RPM range.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001048BTC
Varastossa