Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 2.85 mm nylon filament spool, 1 kg

Taulman 3D

Taulman 3D Nylon Bridge Filament 2.85mm 1kg Black

SKU CH-S4PQ-ZT2E5

High-strength nylon filament with 4800 PSI tensile strength, 248% elongation, reduced warping and strong bed adhesion for reliable 2.85 mm prints

  • ColorBlack
  • TypeFilament
  • Stronger and more durable than PLA or ABS with 4800 PSI tensile strength
  • Maintains nylon strength while reducing warping for reliable prints
  • Prints directly onto glass using PVA glue for easier setup
  • Stronger bed adhesion prevents edges from curling upward
  • 248% elongation provides high flexibility for functional parts

Taulman Nylon Bridge Filament 2.85 mm

This 1 kg spool of black Nylon Bridge filament is made for makers who need industrial-grade toughness from a desktop printer. It delivers the high tensile strength of nylon while reducing the warping and moisture uptake that usually make nylon difficult to handle. The material prints directly onto glass with a thin layer of PVA glue for reliable first-layer adhesion.

Check printer compatibility and filament path

Verify that your printer accepts 2.85 mm diameter filament and that the extruder can reach the temperatures required for nylon-based materials. A heated bed is necessary to take full advantage of the improved bed adhesion and reduced edge curling. Ensure the filament path is clean and the drive gear can grip the slightly flexible strand without slipping.

Upgrades from standard PLA or ABS

Users switching from PLA or ABS gain a tensile strength of 4800 PSI and an elongation at break of 248 %, producing parts that survive functional stress and impact. The formulation bridges the performance of Nylon 645 with easier printing characteristics and lower shrinkage. The jump is worth it when printed parts must endure mechanical load, repeated flexing, or higher temperatures than common thermoplastics allow.

Kohokohdat

  • Stronger and more durable than PLA or ABS with 4800 PSI tensile strength
  • Maintains nylon strength while reducing warping for reliable prints
  • Prints directly onto glass using PVA glue for easier setup
  • Stronger bed adhesion prevents edges from curling upward
  • 248% elongation provides high flexibility for functional parts

Tekniset tiedot

Brandtaulman3d
ColorBlack
TypeFilament

Kysymyksiä tästä tuotteesta

Does the 1 kg spool of 2.85 mm Bridge filament include any adhesive or do I need to buy PVA glue separately?

The filament prints straight onto glass with the use of some PVA glue, which is not included in the box and must be purchased separately.

How does Nylon Bridge differ from the earlier Nylon 645 and which should I choose?

Bridge is a revision of Nylon 645 that keeps the same strength while reducing warping, water uptake and shrinkage, and it costs less — choose Bridge for easier printing and lower price.

What does the 4800 PSI tensile strength mean for parts printed with this 2.85 mm filament?

A tensile strength of 4800 PSI with 248 % elongation means printed parts are significantly stronger and more durable than PLA or ABS while still stretching before they break.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.