Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular NAS chassis with eight front drive bays and three rear fans

TAURKENAM

TAURKENAM K7 8-Bay NAS PC Case

SKU CH-NGFS-P15QB

An eight-bay NAS enclosure supporting Micro-ATX and Mini-ITX boards with hot-swap 2.5 and 3.5-inch drive trays and three pre-installed fans

  • Eight drive bays expand storage capacity
  • 5-inch and 2.5-inch drives supported with hot-swap trays
  • Three pre-installed fans provide quiet, high-volume airflow
  • Micro-ATX and Mini-ITX motherboards fit for flexible builds
  • Standard 1U or FLEX power supply compatibility simplifies upgrades

Target Build & Use

The TAURKENAM K7 is an eight-bay NAS chassis designed for DIY builders who want a compact Micro-ATX or Mini-ITX server. It accepts motherboards measuring 17 by 17 centimetres or 24 by 24 centimetres and ships without a motherboard, CPU or drives. Builders who need more than eight drive bays or a full-size ATX board will need a different enclosure.

Thermals, Noise & Power

Three pre-installed mute fans handle airflow: two 9025 units and one 6025 unit. The case supports a standard 1U power supply and is also compatible with FLEX power supplies. No decibel ratings or power-draw figures are provided by the supplier.

Bundled Extras

The package includes two rear panels, eight hot-swap drive trays that accept 3.5-inch hard drives or 2.5-inch SSDs, SATA data cables and assorted mounting screws. These parts let you populate all bays and connect storage immediately.

Kohokohdat

  • Eight drive bays expand storage capacity
  • 5-inch and 2.5-inch drives supported with hot-swap trays
  • Three pre-installed fans provide quiet, high-volume airflow
  • Micro-ATX and Mini-ITX motherboards fit for flexible builds
  • Standard 1U or FLEX power supply compatibility simplifies upgrades

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How do I install the 1U or FLEX power supply in the K7 8-Bay NAS Case?

Fit a standard 1U unit or a FLEX supply into the rear bay, secure it with the included screws, then connect the 24-pin and CPU cables before closing the chassis.

Which parts will need replacement first in the K7 8-Bay NAS Case?

The three pre-installed fans — two 9025 units and one 6025 unit — are the only moving parts and will wear out before the drive trays or panels.

What thermal limit appears first when all eight 3.5" drives run continuously in the K7 8-Bay NAS Case?

The combined airflow of the two 90 mm and one 60 mm rear fans becomes the bottleneck, so drive temperatures rise before the case itself overheats.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.