Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black steel open-frame bracket with adjustable arms and rubber pads, shown mounted on a VESA plate

TAURKENAM

TAURKENAM Mini PC Mount Bracket 0.6-2.7" VESA 75/100mm 11lb

SKU CH-NCMA-PFKY7

Adjustable steel bracket holds mini PCs from .6 to 2.7 inches wide on VESA 75 or 100 mounts, under desks or on monitor poles, supporting 11 lb with open-frame cooling

  • Adjustable width from .6 to 2.7 inches fits many mini PCs
  • Three mounting choices: VESA 75 or 100 mm, monitor pole, or under desk
  • Solid steel construction supports up to 11 pounds with rust-proof finish
  • Open frame design improves airflow and keeps ports accessible
  • Adjustable straps and rubber pads secure the device and prevent scratches

Adjustable 0.6-2.7" VESA Mount

This steel bracket clamps mini PCs and thin clients between .6 and 2.7 inches wide, then fixes them to 75 mm or 100 mm VESA patterns, a monitor arm pole or a desk underside. It supports devices up to 11 pounds including Intel NUC units with side power buttons, Chromebox, Mac Mini, Lenovo Tiny, Dell OptiPlex Micro and HP ProDesk Mini.

Check Device Width and Mounting Surface

Measure the chassis width to confirm it falls inside the .6 to 2.7 inch range and verify the power button sits on the side so the clamp does not block it. Ensure your monitor or arm offers a 75 mm or 100 mm VESA hole pattern, a suitable pole diameter or a desk lip thick enough for the under-desk clamp.

Open Frame Aids Cooling and Access

The open steel frame lets air move freely around the mounted device, helping to limit thermal throttling without adding fan noise. Rubber pads protect the chassis from scratches while adjustable straps keep it from sliding. All ports and vents stay fully exposed for cable routing and maintenance.

Kohokohdat

  • Adjustable width from .6 to 2.7 inches fits many mini PCs
  • Three mounting choices: VESA 75 or 100 mm, monitor pole, or under desk
  • Solid steel construction supports up to 11 pounds with rust-proof finish
  • Open frame design improves airflow and keeps ports accessible
  • Adjustable straps and rubber pads secure the device and prevent scratches

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What comes in the box and do I need to buy any extra screws or tools?

The bracket includes the steel frame, adjustable shoulder straps, rubber pads and the hardware needed for VESA 75×75 mm and 100×100 mm mounting. No extra screws or tools are required for standard monitor-arm or under-desk installation.

How do I know if my mini PC will fit the 0.6–2.7" width range?

Measure the device at its widest point including any side-mounted power button. If that dimension falls between 0.6" and 2.7" the bracket will hold it; Intel NUC units with the power button on the side, Chromebox, Mac Mini, Lenovo Tiny, Dell OptiPlex Micro and HP ProDesk Mini are all listed as compatible.

Will the 11 lb capacity and open frame keep my device cool when mounted behind a monitor?

The solid-steel bracket is rated for 11 lb and its open-frame design lets air flow freely around the mounted device, reducing thermal throttling while keeping every port accessible.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.