Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular bench power supply, grey metal case, front LCD display with backlight, front AUX terminals, rear output terminals

Tekpower

Tekpower TP3030E 30V 30A DC Adjustable Switching Power Supply

SKU CH-AE9A-SA5RX

A 30 V, 30 A adjustable DC supply with front 5 A aux output and low-ripple performance

  • TypeProprietary Power Supply
  • Adjustable 0-30 V DC output with low ripple
  • Adjustable 0-30 A DC output with low ripple and front AUX 5 A
  • Low 100 mV ripple and noise for clean power
  • Automatic cooling fan prevents overheating during extended use
  • Built-in fuse plus overload and overheat protection

Tekpower TP3030E adjustable DC supply

The Tekpower TP3030E is a professional switching power supply that delivers continuously adjustable 0-30V and 0-30A from its main rear terminals. A front auxiliary output provides up to 5A for auxiliary circuits. A large backlit LCD shows voltage and current values with low ripple performance.

Check mains voltage and operating environment

Verify that your bench or lab can provide a 110V AC input for the unit. The supply is rated for operation between 0 and 40C ambient temperature with controlled relative humidity. Ensure the 13 x 3.5 x 8.5 inch footprint fits your available workspace before ordering.

Integrates into test bench with built-in protection

The automatic fan cooling and fuse protection allow extended runs without overheating, while overload and overheat safeguards protect connected loads. The front auxiliary terminals free the main binding posts for primary devices. A user manual and warranty registration card are included in the package.

Kohokohdat

  • Adjustable 0-30 V DC output with low ripple
  • Adjustable 0-30 A DC output with low ripple and front AUX 5 A
  • Low 100 mV ripple and noise for clean power
  • Automatic cooling fan prevents overheating during extended use
  • Built-in fuse plus overload and overheat protection

Tekniset tiedot

TypeProprietary Power Supply

Kysymyksiä tästä tuotteesta

What does the package include and do I need separate cables for the rear 30 A output?

The box contains the TP3030E unit, a user manual and a warranty registration card. The rear terminals accept standard banana plugs or spade lugs; supply your own leads for the 0-30 V, 0-30 A main output.

When should I use the front AUX terminal instead of the rear 30 A output?

Use the front AUX terminal for loads up to 5 A where convenient front access helps; switch to the rear binding posts when you need the full 0-30 A range.

What does the 100 mV ripple figure mean for a 30 V rail in practice?

At full 30 V output the worst-case ripple is 100 mV peak-to-peak, which is well below 1 % of the rail voltage and suits most analog, digital and RF prototyping work.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.