Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Thermal Grizzly

Thermal Grizzly Minus Pad Advance 100x100x2.0mm 2-Pack

SKU CH-RMQB-JQBHR

Electrically non-conductive thermal pads fill gaps on SSDs, GPUs and other components with 2.0 mm thickness in a two-pack

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Premium cooling for high-performance systems with advanced heat dissipation
  • Improved thermal conductivity over basic pads for heavy loads
  • High compressibility ensures flawless contact on uneven surfaces
  • Electrically non-conductive design protects sensitive electronics from shorts
  • Two 100 x 100 x 2.0 mm pads cover SSDs, GPUs and other components

Thermal Pad for SSDs and GPUs

The Thermal Grizzly Minus Pad Advance is a black thermal interface pad supplied as a two-pack. Each piece measures 100 x 100 mm with a 2.0 mm thickness. It is designed for cooling SSDs, GPU coolers, water blocks, voltage regulators and memory modules in desktop and laptop builds. The electrically non-conductive material protects sensitive electronics from short circuits during installation and operation.

Improved Conductivity and Compressibility

This Advance series pad offers improved thermal conductivity and higher compressibility compared to the Basic series. The softer material conforms to uneven surfaces and fills microscopic gaps between the component and heatsink. Better contact reduces thermal resistance and helps maintain lower operating temperatures under sustained workloads.

Passive Cooling With No Power Draw

The pad operates passively with zero power consumption and no moving parts, so it adds no noise to the system. Its non-conductive composition eliminates the risk of electrical bridging if the material spreads beyond the die area. In normal use it simply sits between surfaces, transferring heat silently while the attached cooler handles dissipation.

Kohokohdat

  • Premium cooling for high-performance systems with advanced heat dissipation
  • Improved thermal conductivity over basic pads for heavy loads
  • High compressibility ensures flawless contact on uneven surfaces
  • Electrically non-conductive design protects sensitive electronics from shorts
  • Two 100 x 100 x 2.0 mm pads cover SSDs, GPUs and other components

Tekniset tiedot

BrandThermal Grizzly
ModelTG-MP-A-100-100-20-2
Part NumberTG-MP-A-100-100-20-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Kysymyksiä tästä tuotteesta

How does the 2.0 mm thickness perform once installed on an SSD or GPU?

The 2.0 mm pad compresses to fill uneven gaps between the component and heatsink, creating full contact that moves heat away from the die efficiently.

What does the electrically non-conductive interface mean for a graphics card or SSD installation?

Because the pad does not conduct electricity, it can safely bridge exposed circuitry, voltage regulators or memory modules without risk of short circuits.

Will the 100 x 100 mm sheet cover a typical M.2 SSD or GPU memory module, and how many pieces come in the pack?

Each 100 x 100 mm sheet can be cut to fit multiple M.2 drives or GPU VRAM chips, and the pack contains two sheets for spares or larger coolers.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.