Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two black square thermal pads 100 by 100 mm 1.0 mm thick

Thermal Grizzly

Thermal Grizzly Minus Pad Basic 100x100x1.0mm 2-pack

SKU CH-H760-KC4G7

Two 100 x 100 x 1.0 mm electrically non-conductive thermal pads for SSDs, GPUs and other electronics

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Electrically non-conductive for safe installation
  • Good thermal conductivity improves component cooling
  • 0 mm thickness fits tight gaps
  • 100 x 100 mm size covers large surfaces
  • Pack of 10 pads supports multiple devices

What the product is

Thermal Grizzly Minus Pad Basic is a two-pack of electrically non-conductive thermal interface pads. Each black pad measures 100 x 100 mm with a 1.0 mm thickness. They are designed to transfer heat from SSDs, GPU coolers, water blocks, voltage regulators and memory modules. The Basic series offers good thermal conductivity and an excellent price-performance ratio for builders and upgraders.

What to check before ordering

Verify that the components you intend to cool have gap heights compatible with a 1.0 mm pad. Ensure the mating surfaces are clean and flat so the pad can make full contact. Confirm that the 100 x 100 mm dimensions can be trimmed or applied without covering adjacent circuitry. The pads are non-conductive, eliminating the risk of shorts if they overlap exposed traces.

How it fits into a build

The pads sit between a heat source and a heatsink, backplate or water-block cold plate to fill microscopic air gaps. They require no curing time and can be cut to shape with scissors for smaller devices. Once installed they free the builder from handling liquid pastes and simplify future maintenance because they lift away cleanly. They work alongside active cooling solutions such as fans or liquid loops.

Kohokohdat

  • Electrically non-conductive for safe installation
  • Good thermal conductivity improves component cooling
  • 0 mm thickness fits tight gaps
  • 100 x 100 mm size covers large surfaces
  • Pack of 10 pads supports multiple devices

Tekniset tiedot

BrandThermal Grizzly
ModelTG-MP-B-100-100-10-2
Part NumberTG-MP-B-100-100-10-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Kysymyksiä tästä tuotteesta

What comes in the pack and is anything else required?

The pack contains two black thermal pads measuring 100 x 100 mm at 1.0 mm thickness. No additional materials are needed for installation.

How do I choose between the Basic, Advance and Pro versions?

The Basic version offers good thermal conductivity with slightly lower compressibility and an excellent price-performance ratio. Advance improves conductivity and compressibility, while Pro provides outstanding conductivity and exceptional compressibility.

What does the 1.0 mm thickness mean when fitting it to an SSD or GPU?

The 1.0 mm pad fills gaps between the component and cooler, ensuring electrically non-conductive contact for effective heat transfer on SSDs, GPU coolers or memory modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.