Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Thermal Hero NEO thermal pad 120×20×1.0 mm soft grey square

Thermal Hero

Thermal Hero NEO thermal pad 120×20 mm 1.0 mm 12.0 W/mK 30 Shore

SKU CH-80SP-ZCY32

High-conductivity 12.0 W/mK silicone pad measuring 120×20×1.0 mm with 30 Shore softness for CPU, GPU and console cooling

  • High thermal conductivity of 12.0 W/mK for efficient heat transfer
  • Medium-soft 30 Shore pad compresses easily to fill gaps
  • 120 x 20 mm size with 1.0 mm thickness fits many components
  • Non-conductive and non-toxic for safe use on CPUs, GPUs and consoles
  • RoHS and REACH compliant materials ensure environmental safety

Thermal pad for CPU GPU consoles

The Thermal Hero NEO pad measures 120 by 20 mm with a 1.0 mm thickness and delivers 12.0 W/mK conductivity. It is a silicone-based thermal interface material designed to transfer heat from processors graphics chips and other integrated circuits. The pad is non-toxic non-electrically-conductive and compliant with RoHS and REACH.

Suits builders who need a soft 30 Shore pad

The medium-soft 30 Shore rating makes the pad easy to compress and handle for both beginners and experienced builders. It works well in high-end laptops graphics cards and gaming consoles where a customizable thermal interface is required. Buyers who need a thinner or thicker pad a different sheet size or a higher conductivity value should look at other options.

Check gap thickness and surface area before ordering

Verify that the 1.0 mm thickness matches the gap between your component and heatsink to avoid poor contact or excessive pressure. Confirm the 120 by 20 mm dimensions cover the entire die or contact area you intend to cool. Ensure surfaces are clean and free of old compound for optimal thermal transfer.

Kohokohdat

  • High thermal conductivity of 12.0 W/mK for efficient heat transfer
  • Medium-soft 30 Shore pad compresses easily to fill gaps
  • 120 x 20 mm size with 1.0 mm thickness fits many components
  • Non-conductive and non-toxic for safe use on CPUs, GPUs and consoles
  • RoHS and REACH compliant materials ensure environmental safety

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Do I need any tools or additional materials to install the 120×20 mm 1.0 mm pad?

No tools are required. The 30 Shore medium-soft pad compresses by hand to fill gaps between the component and heatsink, making installation straightforward for beginners and experts alike.

Will the 12.0 W/mK pad work with the existing heatsink on my older GPU or console?

Yes. The pad is non-electrically conductive and non-corrosive, so it safely contacts legacy heatsinks and components. Its 1.0 mm thickness and high compressibility accommodate uneven surfaces on older hardware.

How can I verify the 12.0 W/mK pad is performing correctly after fitting it?

Monitor component temperatures under load. A proper fit with the 1.0 mm pad should yield lower and more stable temperatures compared to the previous interface material, confirming effective heat transfer.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.