Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black mid-tower case with tempered glass front and side panels, three pre-installed 140mm ARGB fans

Thermaltake

Thermaltake CTE C700 TG ARGB Mid Tower CA-1X7-00F1WN-01

SKU CH-HH3H-XMFGM MPN CA-1X7-00F1WN-01

Mid-tower case supporting E-ATX boards with three pre-installed 140mm ARGB fans and dual tempered glass panels

  • TypeMid Tower
  • ColorBlack
  • Case MaterialSPCC / ABS
  • Power SupplyStandard PS2 PSU (optional)
  • Motherboard Compatibility6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6”
  • Side Panel4mm Tempered Glass x 2

Options C700 Tempered Glass (Black)

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Centralised thermal layout directs airflow efficiently across components
  • Three pre-installed 140 mm ARGB fans provide balanced intake and exhaust
  • Supports E-ATX boards up to 12 x 13 inches for high-end builds
  • Dual 4 mm tempered-glass panels showcase the interior cleanly
  • Fits radiators up to 420 mm at front, rear and bottom for custom loops

Mid Tower for E-ATX Builds

This mid tower chassis supports Mini ITX, Micro ATX, ATX and E-ATX motherboards up to 12 by 13 inches. Three CT140 ARGB fans are pre-installed at the front, top and rear positions. The case is built from SPCC steel and ABS with tempered glass on the front and side panels.

Check Motherboard Size and Drive Count

Verify that your motherboard fits within the 12 by 13 inch E-ATX limit before ordering. Confirm you have enough 3.5 inch bays for mechanical drives and 2.5 inch bays for solid state drives. Ensure the graphics card length does not exceed 327 millimetres with a front radiator or 410 millimetres without one.

Steel Frame with Glass Panels

The SPCC and ABS construction weighs 34.39 pounds and measures 22.3 by 12.9 by 19.9 inches. Two 4 millimetre tempered glass panels showcase the interior while protecting components. Seven expansion slots and a 190 millimetre CPU cooler clearance provide room for large air coolers and full-length cards.

Kohokohdat

  • Centralised thermal layout directs airflow efficiently across components
  • Three pre-installed 140 mm ARGB fans provide balanced intake and exhaust
  • Supports E-ATX boards up to 12 x 13 inches for high-end builds
  • Dual 4 mm tempered-glass panels showcase the interior cleanly
  • Fits radiators up to 420 mm at front, rear and bottom for custom loops

Tekniset tiedot

BrandThermaltake
ModelCA-1X7-00F1WN-01
TypeMid Tower
ColorBlack
Case MaterialSPCC / ABS
Power SupplyStandard PS2 PSU (optional)
Motherboard Compatibility6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX), 12” x 13” (E-ATX)
Side Panel4mm Tempered Glass x 2
Internal 3.5" Drive Bays7
Internal 2.5" Drive Bays6
Expansion Slots7
Fan OptionsFront: 3 x 120mm, 2 x 120mm, 1 x 120mm
3 x 140mm, 2 x 140mm, 1 x 140mm
2 x 200mm, 1 x 200mm
Top: 2 x 120mm, 1 x 120mm
2 x 140mm, 1 x 140mm
Right: 1 x 120mm, 1 x 140mm
Rear: 3 x 120mm, 2 x 120mm, 1 x 120mm
3 x 140mm, 2 x 140mm, 1 x 140mm
Bottom: 3 x 120mm, 2 x 120mm, 1 x 120mm
2 x 140mm, 1 x 140mm
Pre-installed FansFront - 1 x 140mm / Rear - 1 x 140mm / Top - 1 x 140mm
Radiator OptionsFront: 1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 420mm(AIO only), 1 x 280mm, 1 x 140mm
Rear: 1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 420mm(AIO only), 1 x 280mm, 1 x 140mm
Bottom: 1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 280mm, 1 x 140mm
Max GPU Length327mm (With radiator)
410mm (Without radiator)
Max CPU Cooler Height190 mm
Max PSU Length220 mm
Dimensions22.3" x 12.9" x 19.9"
Weight34.39 lbs.
FeaturesFront(intake):
140 x 140 x 25 mm CT140 ARGB fan (1500rpm, 30.5 dBA) x 1
Top(exhaust):
140 x 140 x 25 mm CT140 ARGB fan (1500rpm, 30.5 dBA) x 1
Rear(intake):
140 x 140 x 25 mm CT140 ARGB fan (1500rpm, 30.5 dBA) x 1
Lähetyspaino18.51 kg
Pakkauksen mitat686 × 610 × 432 mm

Tämän mallin muut versiot

4 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What comes in the box with the CTE C700 TG ARGB and what must I buy separately?

The case includes three pre-installed 140 mm CT140 ARGB fans at front, top and rear, two 4 mm tempered-glass side panels, seven 3.5" and six 2.5" drive bays, and seven expansion slots. You must purchase a standard PS2 power supply, motherboard, CPU cooler, graphics card, storage drives and any additional fans or radiators you want.

Which motherboard form factors fit the CTE C700 TG ARGB and how do I choose?

The case supports Mini ITX (6.7" x 6.7"), Micro ATX (9.6" x 9.6"), ATX (12" x 9.6") and E-ATX (12" x 13") boards. Choose the largest form factor your build requires; all four sizes mount directly without adapters.

What does the 410 mm maximum GPU length mean for my graphics card choice?

With no front radiator installed you can fit a card up to 410 mm long. If you mount a front radiator the limit drops to 327 mm, so measure your card and decide on cooling layout before buying.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.