Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Thermaltake

Thermaltake Riing Quad CL-F100-PL12SW-B 120mm case fan 3-pack white

SKU CH-1Y6X-ZK4XR MPN CL-F100-PL12SW-B

Three 120 mm fans with hydraulic bearings, 500–1500 RPM and 54 RGB LEDs per fan

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing
  • RPM500 - 1500 R.P.M

LED RGB

Model Riing Quad

  • Riing Trio
  • Riing Quad

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Option 3 Packs

  • 3 Packs
  • Four independent LED rings with 54 addressable LEDs for customisable colour patterns
  • Hydraulic bearing rated for quiet 25 dBA operation at full speed
  • PWM control from 500 to 1500 RPM delivers up to 40.9 CFM airflow
  • USB 2.0 nine-pin connector links to included controller for NeonMaker software control
  • White 120 mm frame with rubber padding reduces vibration in case or radiator mounts

Thermaltake Riing Quad 120mm triple fan pack

This three-pack of 120mm white case fans includes a dedicated controller and hydraulic bearings rated from 500 to 1500 RPM. Each frame holds 54 addressable RGB LEDs spread across four distinct rings, controllable via the supplied NeonMaker software. Maximum airflow reaches 40.9 CFM at a listed 25 dBA noise level.

Suited for RGB-focused builds needing three

Builders who want synchronised lighting across intake, exhaust and radiator positions will benefit from the bundled controller and four-ring LED layout. Systems that rely on standard 4-pin PWM headers without USB 2.0 internal ports cannot use the included controller. Buyers needing higher static pressure or speeds beyond 1500 RPM should consider other models.

USB 2.0 9-pin controller requirement

The pack connects through a USB 2.0 nine-pin header on the motherboard or an equivalent internal hub. Without that header the lighting and speed control cannot function as designed. Verify the motherboard provides a spare USB 2.0 internal connector before purchase.

Kohokohdat

  • Four independent LED rings with 54 addressable LEDs for customisable colour patterns
  • Hydraulic bearing rated for quiet 25 dBA operation at full speed
  • PWM control from 500 to 1500 RPM delivers up to 40.9 CFM airflow
  • USB 2.0 nine-pin connector links to included controller for NeonMaker software control
  • White 120 mm frame with rubber padding reduces vibration in case or radiator mounts

Tekniset tiedot

BrandThermaltake
SeriesRiing Quad
ModelCL-F100-PL12SW-B
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM500 - 1500 R.P.M
Air Flow40.9 CFM (Max)
Noise Level25 dBA
Power ConnectorUSB 2.0 connectors (9 Pin)
ColorWhite
LEDRGB
Features4 light rings at the front 54 LEDs in total.
Set up your spectacular lighting.
Hydraulic bearing with low-noise design.
Dimensions120 x 120 x 25 mm
Lähetyspaino2.45 kg
Pakkauksen mitat183 × 163 × 94 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much air does the 40.9 CFM maximum actually move inside a case?

At full speed the three fans push up to 40.9 CFM each, giving strong airflow for radiators or case ventilation while the hydraulic bearing keeps noise near 25 dBA.

What does the USB 2.0 9-pin connector control on these fans?

The 9-pin USB 2.0 header powers the 54 RGB LEDs across four rings and carries PWM signals so NeonMaker software can set 16.8 million colours and 500–1500 RPM speeds.

Will the 25 mm thick white frames fit my 120 mm mount points?

Yes, each fan measures 120 x 120 x 25 mm with rubber pads on the corners, matching standard 120 mm case and radiator mounting holes.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.