Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120mm square case fan with ARGB lighting and three swappable blade sets

Thermaltake

Thermaltake SWAFAN GT12 Case Fan 120mm CL-F155-PL12BL-A

SKU CH-JSJ2-3FMQ2 MPN CL-F155-PL12BL-A

A 120 mm case fan with three swappable blade sets — high pressure, high airflow and reverse — running at 500 to 2000 RPM with ARGB lighting

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • Fan Thickness25mm
  • Bearing TypeHydraulic
  • RPMPWM 500 ~ 2000 R.P.M
  • Three detachable blade profiles let you tune pressure or airflow for any build
  • Hydraulic bearing runs at 26.5 dB-A with the pressure blade for quiet operation
  • PWM control spans 500 to 2000 RPM so speed matches thermal demand
  • ARGB lighting on a black 120 mm frame adds addressable colour sync
  • Single pack includes frame, three blades and cable for immediate installation

Thermaltake SWAFAN GT12 120 mm case fan

The Thermaltake SWAFAN GT12 is a 120 mm case fan that ships with three detachable blade sets. Builders who want a single fan that can be tuned for radiator pressure, open-case airflow or exhaust orientation will find the modular design useful. PWM control spans 500 to 2000 R.P.M and ARGB lighting is included. Hydraulic bearing and a 2510 4-pin connector complete the package.

Swapping fixed-blade fans for modular blade choice

Replacing a standard fixed-blade 120 mm fan with this unit lets you match the blade profile to the mounting location without buying multiple models. The high-pressure blade delivers 54.71 CFM at 26.5 dB-A, the high-flow blade 62.23 CFM at 28.3 dB-A and the reverse blade 58.17 CFM at 29.8 dB-A. The jump is worth it when one chassis serves several cooling roles over time.

Check motherboard header

Verify that your board offers a 2510 4-pin PWM header for speed control and ARGB sync. Ensure 25 mm thickness fits the mounting points and that no cables or drive cages block blade removal. The pack includes one frame, three blades and a cable but no separate controller. Buyers who need a bundled multi-fan kit or a hardware controller should look elsewhere.

Kohokohdat

  • Three detachable blade profiles let you tune pressure or airflow for any build
  • Hydraulic bearing runs at 26.5 dB-A with the pressure blade for quiet operation
  • PWM control spans 500 to 2000 RPM so speed matches thermal demand
  • ARGB lighting on a black 120 mm frame adds addressable colour sync
  • Single pack includes frame, three blades and cable for immediate installation

Tekniset tiedot

BrandThermaltake
ModelSWAFAN GT12
Part NumberCL-F155-PL12BL-A
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
Fan Thickness25mm
Bearing TypeHydraulic
RPMPWM 500 ~ 2000 R.P.M
Air FlowHigh Air Pressure Fan Blade: 54.71 CFM
High Air Flow Fan Blade: 62.23 CFM
Reverse Fan Blade: 58.17 CFM
Noise LevelHigh Air Pressure Fan Blade: 26.5 dB-A
High Air Flow Fan Blade: 28.3 dB-A
Reverse Fan Blade: 29.8 dB-A
Power Connector2510-4pin
ColorBlack
LEDARGB
Dimensions120 x 120 x 25 mm
Package Contents1 x Fan Frames
1 x High Air Pressure Fan Blade (Pre-installed)
1 x High Air Flow Fan Blade
1 x Reverse Fan Blade
1 x Cable
Lähetyspaino0.50 kg
Pakkauksen mitat142 × 141 × 89 mm

Kysymyksiä tästä tuotteesta

Does the 120 mm frame with 25 mm thickness fit a standard 120 mm case mount?

Yes, the 120 x 120 x 25 mm dimensions match the standard 120 mm mounting pattern used by most cases.

How do I swap the pre-installed high air pressure blade for the high air flow or reverse blade?

Detach the blade assembly from the fan frame, align the replacement blade pins with the motor hub, and press until it clicks into place.

When should the hydraulic bearing be replaced?

The hydraulic bearing is sealed for the fan's service life; no user replacement is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.