Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Thermaltake

Thermaltake Toughpower GF A3 850W Gold TT Premium Edition power supply

SKU CH-2ZYG-Q30ZA

Fully modular 850 W ATX 3.0 power supply with 80 PLUS Gold efficiency and a native 12VHPWR connector for PCIe 5.0 graphics cards

  • ColorBlack
  • TypeATX 3.0 Compatible
  • Maximum Power850 W
  • Fans1 x 120 mm
  • PFCActive
  • Max PSU Length150 mm

Options 850W

  • 80 PLUS Gold efficiency reduces energy waste
  • Native 12VHPWR connector delivers up to 300W for PCIe 5.0 graphics cards
  • ATX 3.0 compliance supports 200% power excursion and 60% low-load efficiency
  • Fully modular cabling cuts clutter and improves case airflow
  • Japanese main electrolytic capacitors and 100,000-hour MTBF ensure long-term reliability

850W ATX 3.0 Power Supply

The Thermaltake Toughpower GF A3 850W Gold TT Premium Edition is a fully modular ATX 3.0 compatible power supply. It delivers 850W of continuous power with 80 PLUS Gold certified efficiency. The unit includes a native 16-pin 12VHPWR connector ready for PCIe Gen 5.0 graphics cards. Japanese main electrolytic capacitors support long-term reliability.

Suited for modern PC builds needing ATX 3.0 support

This unit suits builders assembling systems with current-generation GPUs that require a native 12VHPWR connection. The 850W output handles high-performance single-GPU configurations comfortably. Builders planning multi-GPU setups or extreme overclocking headroom should look at higher wattage units. Cases with severe length restrictions under 150mm cannot accommodate this PSU.

Native 12VHPWR connector for PCIe Gen 5.0

The defining specification is the native 16-pin 12VHPWR cable designed for PCIe Gen 5.0 graphics cards. This connector can deliver up to 300W directly to a compatible GPU without adapters. ATX 3.0 compliance ensures support for 200% power excursions and 60% low-load efficiency requirements. This connector determines whether the PSU matches your graphics card's power input.

Kohokohdat

  • 80 PLUS Gold efficiency reduces energy waste
  • Native 12VHPWR connector delivers up to 300W for PCIe 5.0 graphics cards
  • ATX 3.0 compliance supports 200% power excursion and 60% low-load efficiency
  • Fully modular cabling cuts clutter and improves case airflow
  • Japanese main electrolytic capacitors and 100,000-hour MTBF ensure long-term reliability

Tekniset tiedot

BrandThermaltake
SeriesTOUGHPOWER GF A3
ColorBlack
TypeATX 3.0 Compatible
Maximum Power850 W
Fans1 x 120 mm
PFCActive
Max PSU Length150 mm
ModularFull Modular
Power Good Signal100-250 msec
Hold-up Time> 17msec
Energy-Efficient80 PLUS GOLD Certified
Over Voltage ProtectionYes
Input Voltage100 - 240 V
Input Frequency Range50Hz - 60Hz
Input Current10A Max.
MTBF>100,000 Hours
ApprovalsCE/FCC/UKCA/ICES/LVD/TUV/cTUVus/CB/CCC/BSMI
Dimensions150mm(W)x86mm(H)x140mm(D)
Weight1.63kg
+3.3V Max. Current20A
+5V Max. Current20A
+12V1 Max. Current62.5A
-12V Max. Current3A
+5VSB Max. Current0.3A
Main Connector24 Pin
PCI-Express Connector4 x 8-Pin (6+2) PCI-E connectors,
1 x 16-Pin (12+4) PCI-E connector
SATA Power Connector8
Floppy Connector1
Peripheral Connector4
Fans Total Quantity1
Top Fans Size120mm
Short Circuit ProtectionYes
Under Voltage ProtectionYes
Over Current ProtectionYes
Over Power ProtectionYes
Over Temperature ProtectionYes

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 12VHPWR connector run a PCIe 5.0 graphics card without an adapter?

Yes, the native 16-pin 12VHPWR cable is included and rated for up to 300 W on PCIe 5.0 cards.

Does the 150 mm depth leave clearance in a standard mid-tower case?

At 150 mm deep the unit fits most mid-tower chassis; measure your case’s PSU bay to confirm.

Is the PSU fully modular so I only connect the cables my build needs?

Fully modular design lets you attach only the required cables, reducing clutter and improving airflow.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.