THREE COLOUR DOGFISH 512MB CompactFlash Type I FAT16 memory card
- CompactFlash
- Compact Flash Memory
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
THREE COLOUR DOGFISH
A 2 GB CompactFlash Type I card formatted FAT16 with a 50-pin interface for industrial gear and vintage cameras
Capacity 2GB
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The THREE COLOUR DOGFISH card is a 2GB CompactFlash Type I memory device formatted with FAT16. It fits legacy hosts that require a 50 pin hole interface and the 43 mm x 36 mm x 3.3 mm form factor. Target users maintain industrial equipment, vintage digital cameras, CNC controllers, POS systems or portable field recorders that only accept this older media standard.
The card is rated shockproof, moisture-resistant, anti-magnetic and X-ray-proof. It operates across extreme temperatures and humidity without data loss. Error checking technology protects critical files during long recording sessions or server backup tasks where the media remains under continuous write load rather than brief bursts.
The 2GB limit is imposed by the FAT16 file system used on this series. Devices needing larger volumes cannot use this card, and no firmware update can raise the ceiling. Buyers whose hosts demand 4GB or more must source a different format.
| Brand | THREE COLOUR DOGFISH |
|---|---|
| Card type | CompactFlash |
| Series | FAT16 |
| Type | Compact Flash Memory |
| Capacity | 2GB |
| Option | 512MB |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The card uses solid-state flash memory with no moving parts, so it produces minimal heat and draws very little power during all-day use in CNC controllers, data loggers or similar devices.
You need a device with a 50-pin CompactFlash Type I slot that supports the FAT16 file system, such as older digital cameras, CNC machine controllers, PLCs, DOS-era PCs or industrial embedded systems.
Yes, the card shares the same 50-pin Type I interface and FAT16 format, so it can be swapped with 128 MB, 256 MB or 512 MB cards in the same legacy equipment without compatibility issues.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?