Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Beige 5.25 inch tray-loading DVD-ROM drive with horizontal and vertical mounting

Toshiba

Toshiba SD-M1612 5.25" Beige ATAPI/E-IDE DVD-ROM Drive

SKU CH-PAFB-Q9NSZ MPN SD-M1612

A beige 5.25" tray-loading DVD-ROM drive reading DVD-ROM at 16x and CD-ROM at 48x over ATAPI/E-IDE with 512KB cache

  • TypeDVD-ROM Drive
  • Cache512KB
  • DVD-ROM2x for DVD-RAM 16x for DVD-ROM
  • CD-ROM48X
  • Form Factor5.25"
  • Panel ColorBeige
  • Reads DVD-ROM discs at 16× speed for quick data access
  • Reads CD-ROM discs at 48× for fast legacy media retrieval
  • 512 KB cache smooths data flow during sustained reads
  • 25″ form factor fits standard desktop drive bays
  • Horizontal and vertical mounting options suit varied case layouts

Product identity

The Toshiba SD-M1612 is a 5.25-inch beige DVD-ROM drive with an ATAPI/E-IDE interface and a tray-load mechanism. It reads DVD-ROM media at 16x speed and CD-ROM media at 48x speed, making it suitable for legacy system restorations or archival tasks where optical reading is still required.

Sustained reading behaviour

A 512KB buffer helps maintain steady data flow during long sequential reads across full discs. The drive supports horizontal or vertical mounting without affecting throughput, and its DVD-RAM read capability at 2x adds compatibility for older rewritable cartridges used in industrial archives.

Installation notes

The standard 5.25-inch form factor fits typical desktop bays using four side screws, and the beige front panel matches era-correct chassis aesthetics. Builders must provide a spare IDE channel and a 4-pin Molex power connector; systems lacking legacy IDE ports will need an adapter not included with the drive.

Kohokohdat

  • Reads DVD-ROM discs at 16× speed for quick data access
  • Reads CD-ROM discs at 48× for fast legacy media retrieval
  • 512 KB cache smooths data flow during sustained reads
  • 25″ form factor fits standard desktop drive bays
  • Horizontal and vertical mounting options suit varied case layouts

Tekniset tiedot

BrandTOSHIBA
TypeDVD-ROM Drive
ModelSD-M1612
Cache512KB
DVD-ROM2x for DVD-RAM
16x for DVD-ROM
CD-ROM48X
Form Factor5.25"
Panel ColorBeige
Load TypeTray
InterfaceATAPI/E-IDE
FeaturesHorizontal & Vertical mounting
Lähetyspaino0.99 kg
Pakkauksen mitat193 × 146 × 41 mm

Kysymyksiä tästä tuotteesta

How loud or hot does the 16x DVD-ROM drive get when running all day?

The drive uses a tray-load mechanism and supports horizontal or vertical mounting, which helps airflow around the 5.25" beige chassis during extended use.

What cable and bay does the ATAPI/E-IDE interface need to work?

You need a standard 40-pin IDE ribbon cable, a free 5.25" drive bay, and a Molex power connector from the PSU.

Will this 48X CD-ROM drive work alongside an older CD-RW drive on the same IDE channel?

Yes, set one drive as master and the other as slave using the jumpers on the rear; both will share the single ATAPI/E-IDE channel.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.