Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DIMM with black chips and gold contacts

Total Micro Technologies

Total Micro Technologies 862974B21TM 8GB DDR4 desktop RAM

SKU CH-JWSF-SW7EJ MPN 862974B21TM

ECC DDR4 DIMM module rated at 2400 MHz with CL17 latency and 1.20 V operation

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCECC
  • BIOS/Performance ProfileIntel XMP 2.0
  • 8GB DDR4 capacity expands system memory for demanding workloads
  • 2400 MHz speed delivers responsive data throughput
  • ECC error checking protects data integrity in critical tasks
  • CL17 CAS latency provides efficient memory access timing
  • 20V operation reduces power draw during sustained use

8GB DDR4 ECC Module for Server Builds

This 8GB DDR4-2400 module adds ECC-protected memory to compatible HPE ProLiant Gen9 Entry servers. The unbuffered DIMM runs at 1.20V with CL17 latency and includes an Intel XMP 2.0 profile for straightforward configuration. It suits administrators who need single-module capacity expansion without registered buffering.

288-Pin DIMM Fits Standard DDR4 Slots

The stick uses the industry-standard 288-pin DDR4 form factor and measures 7.8 inches long by 3.5 inches wide with a 750 mil thickness. It requires a motherboard that accepts unbuffered ECC DDR4 memory and an available DIMM slot. The single-rank design leaves additional slots free for future upgrades.

Low-Voltage Operation Limits Heat and Power Draw

At 1.20V the module draws minimal power during typical server workloads, keeping thermal output low inside dense chassis. Unbuffered signal processing reduces electrical load on the memory controller. The green PCB and standard-height heat spreader allow unrestricted airflow from existing system fans.

Kohokohdat

  • 8GB DDR4 capacity expands system memory for demanding workloads
  • 2400 MHz speed delivers responsive data throughput
  • ECC error checking protects data integrity in critical tasks
  • CL17 CAS latency provides efficient memory access timing
  • 20V operation reduces power draw during sustained use

Tekniset tiedot

BrandTotal Micro
Part Number862974B21TM
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCECC
BIOS/Performance ProfileIntel XMP 2.0
Lähetyspaino0.45 kg
Pakkauksen mitat226 × 143 × 55 mm

Kysymyksiä tästä tuotteesta

What is the CAS latency figure that determines the first timing limit under sustained use?

The module runs at CL17, so each access cycle waits 17 clock ticks before data is returned.

How much heat and power does the 1.20 V DDR4 DIMM produce when running all day?

At 1.20 V the stick draws minimal power and stays cool enough for passive airflow in a server chassis.

Which 288-pin unbuffered ECC DIMM slot must the motherboard already provide for this module to work?

A standard DDR4 288-pin DIMM slot with unbuffered ECC support is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.