Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with black memory chips and gold edge connectors

Total Micro Technologies

Total Micro Technologies T0E51AT-TM 8GB DDR4 2133 desktop RAM

SKU CH-K5EJ-V17VX MPN T0E51AT-TM

8GB DDR4 2133 desktop module rated at PC4-17000 with CL1.5 latency for HP systems

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL1.5
  • ColorBlack
  • 8GB capacity supports everyday multitasking with DDR4 2133 speed
  • CL1.5 latency keeps data access responsive at PC4 17000 bandwidth
  • Black module fits standard desktop DIMM slots for straightforward installation
  • Total Micro Technologies design targets HP desktop compatibility
  • New condition ensures reliable performance from first use

HP-Compatible 8GB DDR4 Module

This 8 GB DDR4 2133 desktop memory module carries the Total Micro Technologies part number T0E51AT-TM and is specified for HP systems. It runs at PC4-17000 speed with a CAS latency of CL1.5 and uses a black PCB. Builders maintaining or expanding an HP desktop that requires this exact speed and form factor can install it directly.

Replaces Slower or Smaller DDR4 Sticks

If the current system runs lower-frequency DDR4 or has fewer than 8 GB installed, this module restores the intended 2133 MT/s data rate and adds capacity in a single slot. The upgrade is worthwhile when the platform’s memory controller is validated for DDR4 2133 and the existing DIMMs limit multitasking or application responsiveness.

Fits Standard UDIMM Slots in HP Desktops

The module plugs into a regular 288-pin DDR4 UDIMM socket and draws power from the motherboard’s memory voltage rail. It frees an additional slot for future expansion when the board provides more than one DIMM position. No extra cooling, cabling or firmware steps are required beyond the normal BIOS memory training.

Kohokohdat

  • 8GB capacity supports everyday multitasking with DDR4 2133 speed
  • CL1.5 latency keeps data access responsive at PC4 17000 bandwidth
  • Black module fits standard desktop DIMM slots for straightforward installation
  • Total Micro Technologies design targets HP desktop compatibility
  • New condition ensures reliable performance from first use

Tekniset tiedot

BrandTotal Micro
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL1.5
ColorBlack
Lähetyspaino0.05 kg
Pakkauksen mitat178 × 102 × 51 mm

Kysymyksiä tästä tuotteesta

What physical slot does this 8GB DDR4 2133 module require?

The module uses the standard DDR4 DIMM form factor, so it installs in any desktop motherboard slot that accepts DDR4 memory.

What is the correct way to seat the module and which step is often missed?

Align the notch with the slot key, press down firmly until both side clips click shut, and verify the module sits level; the step most often missed is confirming both clips have fully engaged.

When should this 8GB DDR4 2133 stick be replaced or checked?

Replace the stick if memory diagnostics report errors, if the system fails to POST with it installed, or if you upgrade to a platform that requires a higher speed than 2133 MT/s.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.