Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Three white cylindrical mesh Wi-Fi units with power adapters and Ethernet cable

TP-Link

TP-Link Deco 7 BE23 Wi-Fi 7 mesh Wi-Fi system, 3-pack

SKU CH-0TNQ-TEV8E

Three-unit mesh system covers up to 6,500 sq ft with dual-band Wi-Fi 7, two 2.5 Gbps ports per node and support for 150 devices

  • Seamless coverage up to 6,500 sq. ft with three units
  • Wired backhaul at 2.5 Gbps via two ports per node
  • Wi-Fi 7 MLO stability for simultaneous wireless and wired links
  • Connects up to 150 devices without performance loss
  • 4K-QAM and 160 MHz channels deliver 3.6 Gbps total throughput

TP-Link Deco 7 BE23 mesh Wi-Fi system

The TP-Link Deco 7 BE23 is a tri-unit mesh Wi-Fi system built on the Wi-Fi 7 standard. It delivers dual-band wireless connectivity with a combined 3.6 Gbps throughput across four streams. The package includes three nodes, three power adapters and one RJ45 Ethernet cable for initial setup.

Suited for large homes needing wide coverage

This system covers up to 6,500 sq. ft and supports 150 simultaneous devices, making it suitable for remote workers, gamers and families with many smart devices. Each node provides two 2.5 Gbps ports for fast wired backhaul or client connections. Homes with modest internet plans or only a few wireless clients will not utilise the available bandwidth or multi-link operation features.

Dual-band Wi-Fi 7 with 4-stream MLO and 2.5 Gbps

The single specification that decides suitability is the dual-band Wi-Fi 7 implementation with Multi-Link Operation across four streams. It reaches 2882 Mbps on the 5 GHz band and 688 Mbps on the 2.4 GHz band using 160 MHz channels. Buyers whose devices lack Wi-Fi 7 support cannot access the full throughput or latency benefits.

Kohokohdat

  • Seamless coverage up to 6,500 sq. ft with three units
  • Wired backhaul at 2.5 Gbps via two ports per node
  • Wi-Fi 7 MLO stability for simultaneous wireless and wired links
  • Connects up to 150 devices without performance loss
  • 4K-QAM and 160 MHz channels deliver 3.6 Gbps total throughput

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How much space does each Deco 7 BE23 unit need on a shelf or table?

Each node has four high-gain antennas and four high-power FEMs built in, so allow a few centimetres of clearance around the top and sides for the antennas to radiate freely.

What is the step people miss when wiring the 2.5 Gbps ports for wired backhaul?

Connect the Ethernet cable to the 2.5 Gbps LAN port on the main unit and the 2.5 Gbps WAN/LAN port on the satellite, then let the Deco app detect the wired link before moving the satellite to its final spot.

How often should I check for firmware updates to keep the 3.6 Gbps Wi-Fi 7 performance current?

Enable automatic updates in the Deco app; the system will download and install security and performance patches overnight without interrupting the 150-device capacity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.