Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Three white cylindrical mesh units with twelve visible antennas

TP-Link

TP-Link Deco BE95 Quad-Band WiFi 7 Mesh System 3-Pack

SKU CH-ZMR0-1X9YE

A three-pack mesh system delivers quad-band Wi-Fi 7 with 16 streams, dual 10G and dual 2.5G ports, 12 high-gain antennas and AI-driven roaming for over 200 devices

  • Quad-band WiFi 7 reaches 33000 Mbps total throughput across four frequency bands
  • Sixteen spatial streams serve over 200 devices simultaneously without congestion
  • Dual 10 Gbps ports plus two 2.5 Gbps ports enable fibre and copper wired backhaul
  • AI-driven roaming creates a single network name with seamless handoff between nodes
  • Twelve high-gain antennas and 320 MHz channels extend coverage throughout large homes

Deco BE95 3-Pack Mesh Overview

The TP-Link Deco BE95 is a quad-band WiFi 7 mesh system sold as a three-unit pack. It targets households that need high-throughput wireless coverage for gaming, streaming and many simultaneous devices. The system delivers a combined BE33000 rating across four radio bands.

Installation and Common Issues

Each unit includes two 10G ports and two 2.5G ports for wired backhaul, plus a USB 3.0 port for local storage. The Deco app guides placement and firmware updates. Thick walls or metal structures can reduce wireless backhaul performance, so Ethernet links between units are recommended where possible.

Pre-Purchase Checklist

Verify that your internet connection terminates with an RJ45 or SFP+ handoff compatible with the 10G WAN/LAN ports. Confirm client devices support 802.11be to use 320 MHz channels and 4K-QAM on the 6 GHz radios. Ensure mains sockets are available at the chosen node locations.

Kohokohdat

  • Quad-band WiFi 7 reaches 33000 Mbps total throughput across four frequency bands
  • Sixteen spatial streams serve over 200 devices simultaneously without congestion
  • Dual 10 Gbps ports plus two 2.5 Gbps ports enable fibre and copper wired backhaul
  • AI-driven roaming creates a single network name with seamless handoff between nodes
  • Twelve high-gain antennas and 320 MHz channels extend coverage throughout large homes

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How can I verify the Deco BE95 mesh is operating at full 11520 Mbps 6 GHz performance after setup?

The Deco app shows per-node link speeds and band allocation; look for 320 MHz channel width and 4K-QAM indicators on both 6 GHz radios to confirm BE33000 class throughput.

What comes in the 3-pack box and what must I source separately for the 10G fiber uplink?

Three Deco BE95 units, power adapters, and RJ45 cables are included; an SFP+ transceiver module for the combo port and any additional Ethernet cabling are purchased separately.

Should I choose the 3-pack or add a fourth Deco BE95 unit for a three-storey house with 200 connected devices?

The 3-pack is rated for 200 devices and simultaneous 16-stream MU-MIMO; start with three nodes and use the app's coverage map to decide if a fourth unit is needed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.