Tripp Lite
Tripp Lite PDUMH30ATNET Switched ATS PDU 2U 24×5-15/20R 1×L5-30R 2×L5-30P 10ft 30A 2.9kW
Rack-mount ATS and switched PDU with dual L5-30P inputs, 24 switched 5-15/20R outlets, one switched L5-30R outlet and remote network management
- TypeSwitched
- Rack Size2U
- StyleRackmount
- Remote Management ProtocolSMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP pro
- Front Panel LEDs25 LEDs display power on - off status for each outlet, plus
- CertificationsTested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM
- Auto-transfer switching keeps equipment running during source failure
- Twenty-five switched outlets allow remote power cycling of each device
- Dual L5-30P inputs with ten-foot cords enable redundant A/B power feeds
- Two 20A breakers protect twelve outlets each against overload
- Built-in LX network interface supports SNMP, SSH and other protocols for remote management
2U Switched ATS PDU with LX Platform
This 2U rack-mount power distribution unit combines an automatic transfer switch with individually switched outlets. Dual NEMA L5-30P inputs accept 100V, 120V or 127V at up to 30A each, providing redundant A and B power for non-redundant network devices. The built-in LX Platform network interface enables remote control and monitoring via SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP and NTP protocols.
Thermals noise and power draw
Solid-state switching transfers load between the two 10-foot input cords without moving parts, keeping acoustic output negligible in normal operation. Front-panel LEDs show on-off status for all 25 outlets plus primary and secondary input power. Two 20A output breakers protect the 24 switched 5-15/20R outlets in two banks of 12, while the single switched L5-30R outlet handles higher-draw equipment up to the 2.9kW total capacity.
Replaces basic PDUs without switching or ATS
Sites running single-cord PDUs gain automatic failover and per-outlet remote reboot without replacing rack hardware. The upgrade is worth it when equipment lacks redundant power supplies but the facility provides dual power feeds, or when administrators need scripted power cycling over the network. TAA compliance and UL 60950-1 testing suit federal and regulated environments. Builders needing more than 25 outlets or three-phase input should look elsewhere.
Kohokohdat
- Auto-transfer switching keeps equipment running during source failure
- Twenty-five switched outlets allow remote power cycling of each device
- Dual L5-30P inputs with ten-foot cords enable redundant A/B power feeds
- Two 20A breakers protect twelve outlets each against overload
- Built-in LX network interface supports SNMP, SSH and other protocols for remote management
Tekniset tiedot
| Brand | Tripp Lite |
|---|---|
| Model | PDUMH30ATNET |
| Type | Switched |
| Rack Size | 2U |
| Style | Rackmount |
| Remote Management Protocol | SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols |
| Front Panel LEDs | 25 LEDs display power on - off status for each outlet, plus 2 LEDs for power status on Primary and Secondary input connection. |
| Certifications | Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS Complaint |
| ROHS | Yes |
| Package Includes | ATS / Switched PDU with two L5-30P inputs Installable 2U mounting brackets Operating manual |
| Input Voltage | 100V, 120V, 127V |
| Maximum Input Current | 30A |
| Input Connector(s) | NEMA L5-30P |
| Cord Length | 10 Feet |
| Output Voltage | 120V |
| Output Frequency | 60 Hz |
| Output Connector(s) | 24 x 5-15/20R (switched), 1 x L5-30R (switched) |
| Overload Protection | Two 20A output breakers protect 12 5-15/20R outlets each |
| Operating Relative Humidity | 5 - 95% |
| Operating Elevation | 0 - 10000 Feet |
| Storage Temperature | -15 - 50 Celcius degree |
| Storage Relative Humidity | 5 - 95% |
| Features | 120V 30A Power Distribution Unit (PDU) with Auto-Transfer Switch (ATS) and Switched output receptacles (agency derated to 24A continuous) ATS features provide redundant power for critical network equipment with a single input power cord Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface Visual meter reports output power consumption in amps 25 switched outlets (24 x 5-15/20R & 1 x L5-30R); 2U horizontal rackmount form factor; 12.50" depth Two NEMA L5-30P 10 Feet inputs connect to separate PRIMARY and SECONDARY powe |
| Dimensions | 3.50" x 17.50" x 12.50" |
| Weight | 13.80 lbs. |
| Lähetyspaino | 10.43 kg |
| Pakkauksen mitat | 521 × 432 × 203 mm |
Kysymyksiä tästä tuotteesta
How do I mount this 2U PDU in a rack and connect the two 10ft L5-30P cords to separate power sources?
Use the included 2U mounting brackets to secure the unit in a standard rack. Plug each L5-30P cord into independent 30A 120V feeds so the auto-transfer switch can fail over between primary and secondary inputs.
What components may need replacement after extended operation?
The two 20A output breakers that protect the 24 switched 5-15/20R outlets are the primary serviceable parts; they can be reset or replaced if they trip repeatedly under sustained load.
At what load does the PDU hit its first hard limit during continuous use?
The 30A maximum input current and the two 20A output breakers (each covering 12 outlets) set the ceiling; sustained draw above 30A total or 20A per breaker bank will trip protection.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 $
0.0005186BTC
Varastossa