Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver metal mining unit with front grille and rear exhaust ports

TROUVER

TROUVER Whatsminer M50 118 Th/s 3306W mining hardware

SKU CH-3MFF-E39WY

SHA-256 ASIC miner delivering 118 Th/s at 3306 W with Ethernet connectivity

  • 118 Th/s SHA-256 hashrate for high Bitcoin mining throughput
  • 3306 W power draw sets clear energy budget expectations
  • 5 nm chip process enables efficient performance per watt
  • Ethernet interface provides stable wired network connectivity
  • Operates reliably from 5 °C to 45 °C ambient temperature

Bitcoin SHA-256 miner for high-density hashing

The Whatsminer M50 delivers a maximum hashrate of 118Th/s while drawing 3306W, targeting operators who need dense SHA-256 throughput in a single ASIC chassis. It connects via Ethernet and is built on a 5nm process, released in July 2022 for continuous mining workloads.

Thermal envelope and acoustic profile

The unit is rated for ambient temperatures of 5 to 45 °C and humidity of 5 to 95 %, requiring strong forced-air ventilation to stay within limits. In normal operation the machine runs very hot and very loud, so rack or room airflow must be planned before deployment.

Included accessories and software impact

The supplier data lists no bundled cables, controllers or management software beyond the Ethernet interface. Operators must supply their own power distribution, networking and monitoring stack; nothing in the box changes setup complexity or remote-management capability.

Kohokohdat

  • 118 Th/s SHA-256 hashrate for high Bitcoin mining throughput
  • 3306 W power draw sets clear energy budget expectations
  • 5 nm chip process enables efficient performance per watt
  • Ethernet interface provides stable wired network connectivity
  • Operates reliably from 5 °C to 45 °C ambient temperature

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How is the M50 installed and what step is often missed?

Connect the unit to a wired Ethernet network and a 3306 W power supply, then ensure the intake and exhaust paths stay clear so ambient temperature remains between 5 and 45 °C; the step most people miss is providing enough ventilation for the heat output.

What maintenance or replacement will the M50 need later?

Dust the fan intakes and exhaust vents regularly to keep airflow steady, and plan to replace the cooling fans when bearing noise or reduced speed appears, since they run continuously at high load.

What limit shows up first under sustained use on the M50?

The 5–45 °C operating temperature range is the first constraint; if inlet air exceeds 45 °C the miner will throttle or shut down to protect the 5 nm chips.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.