Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green ATX server motherboard with dual socket 940 layout, four DDR slots and five PCI slots

TYAN

TYAN S2875ANRF Dual Socket 940 server motherboard

SKU CH-X8F8-5NY9Z MPN S2875ANRF

Dual Socket 940 ATX server board with AMD 8151 chipset, four DDR 400 registered ECC slots up to 8 GB, AGP 8X, five PCI slots, four SATA 1.5 Gb/s ports with Sil 3114 RAID and two ATA 133 channels

  • CPU Socket TypeDual 940
  • CPU TypeDual AMD Opteron
  • North BridgeAMD 8151
  • South BridgeAMD 8111
  • Other ChipsetWinbond W83627HF Super I/O ASIC
  • Number of DDR Slots4 x 184Pin
  • Dual Socket 940 for twin AMD Opteron processors
  • AMD 8151 northbridge with 800 MHz system bus
  • Four 184-pin DDR 400 slots support 8 GB registered ECC
  • Four SATA 1.5 Gb/s ports with RAID 0/1/0+1 via Sil 3114
  • 6-channel Realtek ALC655 audio and AGP 4X/8X slot

Dual Socket 940 server board

The TYAN S2875ANRF is an ATX motherboard built for dual AMD Opteron processors in Socket 940. It uses the AMD 8151 northbridge and AMD 8111 southbridge with a Winbond W83627HF Super I/O ASIC. Four 184-pin DDR slots accept registered ECC DDR 400 memory up to 8 GB total.

Suited for legacy dual-CPU maintenance.

This board fits technicians repairing or extending existing Socket 940 platforms that rely on AGP 4X/8X graphics and 32-bit PCI expansion. Five PCI slots and one AGP slot provide the I/O mix those systems expect. Builders needing current-generation CPU sockets, PCI Express slots, or memory capacities beyond 8 GB should select a different platform.

Dual Socket 940 requirement

The defining specification is the pair of Socket 940 CPU sockets; the board only operates with two compatible AMD Opteron processors installed. If the target system uses any other socket type or a single-processor configuration, this motherboard will not fit.

Kohokohdat

  • Dual Socket 940 for twin AMD Opteron processors
  • AMD 8151 northbridge with 800 MHz system bus
  • Four 184-pin DDR 400 slots support 8 GB registered ECC
  • Four SATA 1.5 Gb/s ports with RAID 0/1/0+1 via Sil 3114
  • 6-channel Realtek ALC655 audio and AGP 4X/8X slot

Tekniset tiedot

BrandTYAN
ModelS2875ANRF
CPU Socket TypeDual 940
CPU TypeDual AMD Opteron
North BridgeAMD 8151
South BridgeAMD 8111
Other ChipsetWinbond W83627HF Super I/O ASIC
Number of DDR Slots4 x 184Pin
DDR StandardDDR 400 (PC 3200)
Maximum Memory Supported8GB
ECC SupportedYes
RegisteredYes
AGP Slots1 x AGP 4X / 8X
PCI Slots5 x PCI Slots
PATA2 x ATA 133 4 Dev. Max
SATA4 x SATA 1.5Gb/s
SATA RAID0/1/0+1
Additional RAID ControllerSil 3114
Onboard Video ChipsetNone
Audio ChipsetRealtek ALC655
Audio Channels6 Channels
LAN ChipsetIntel 82541EI
LAN Speed10/100/1000Mbps
Max LAN Speed1Gbps
PS/22
COM2
LPT1
USB 1.1/2.02 x USB 1.1 + 2 x USB 2.0
Audio Ports3 Ports
Onboard 1394Two FireWire (IEEE 1394a) ports (one rear connector and one internal connector)
FeaturesSix 3-pin headers for CPU/Chassis Fans
Form FactorATX
Dimensions (W x L)12" x 9.8"
Package ContentsS2875ANRF
User Manual
Software Disk
Rear I/O Panel Shield
2 x Driver Floppy Disk
2 x IDE Cable
FDD Cable
4 x SATA Cable
2 x Power Cable
IEEE 1394 Bracket
2 x CPU Clip

Kysymyksiä tästä tuotteesta

How can I confirm the AMD 8151 northbridge is active after installing dual Socket 940 Opteron processors?

The system should POST and show both CPUs detected in the BIOS setup; registered ECC DDR 400 memory must be reported at the correct speed and the onboard Realtek ALC655 audio should appear in the device list.

Which cables or add-in cards are not included with the S2875ANRF motherboard?

The board provides four SATA 1.5Gb/s ports and two ATA 133 connectors; SATA and PATA cables, an AGP graphics card and any PCI expansion cards must be purchased separately.

Should I choose 184-pin registered ECC DDR 400 modules or unbuffered memory for the four DIMM slots?

The chipset requires registered ECC DDR 400 (PC 3200) modules; unbuffered memory is not supported and the maximum capacity is 8 GB across the four slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.