UMEMORY
UMEMORY 2.5" SATA III Internal SSD 250GB
A 2.5-inch SATA III solid-state drive with 250GB capacity and up to 500MB/s read speed for faster boot and file access
- Max Sequential Read500MB/s
- Max Sequential Write400MB/s
- ConnectorSATA 3.0
- Form Factor2.5-inch
- Capacity250GB
- InterfaceSATA III
Capacity 250GB
- 120GB
- 250GB
- Fast boot cuts wait time with 500MB/s reads
- Swift file access at 400MB/s write speed
- 250GB capacity stores OS plus apps
- 5-inch SATA 3.0 fits laptops and desktops
- Solid-state build outlasts mechanical hard drives
UMEMORY 2.5" SATA III 250GB SSD
This UMEMORY internal solid-state drive uses a 2.5-inch form factor and a SATA 3.0 connector to deliver 250GB of storage capacity. It is built for laptops and desktop PCs that accept standard SATA drives.
Suits SATA-only laptop
The drive fits systems with a 2.5-inch SATA bay and a SATA III controller, offering up to 500MB/s read and 400MB/s write speeds. It is not intended for machines that only provide M.2 PCIe slots or that require larger storage volumes.
SATA 3.0 interface with 500MB/s maximum sequential
The single specification that determines compatibility is the SATA 3.0 interface, which limits peak throughput to 500MB/s and requires a matching SATA data and power connection in the host device.
Kohokohdat
- Fast boot cuts wait time with 500MB/s reads
- Swift file access at 400MB/s write speed
- 250GB capacity stores OS plus apps
- 5-inch SATA 3.0 fits laptops and desktops
- Solid-state build outlasts mechanical hard drives
Tekniset tiedot
| Max Sequential Read | 500MB/s |
|---|---|
| Max Sequential Write | 400MB/s |
| Connector | SATA 3.0 |
| Form Factor | 2.5-inch |
| Capacity | 250GB |
| Interface | SATA III |
Tämän mallin muut versiot
1 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Kysymyksiä tästä tuotteesta
Will the 2.5-inch SATA III 250GB drive fit and work in a laptop that currently uses a mechanical 2.5-inch SATA drive?
Yes — the drive uses the standard 2.5-inch form factor and SATA 3.0 connector, so it drops into the same bay and cable as an older mechanical drive.
How can I confirm the drive is delivering the advertised 500MB/s read and 400MB/s write speeds after installation?
Run a benchmark tool such as CrystalDiskMark or AS SSD; the sequential read result should approach 500 MB/s and the write result should approach 400 MB/s on a SATA III port.
Does the package include a mounting bracket, SATA data cable or cloning software, or must I buy them separately?
The drive is supplied as a bare 2.5-inch SATA III SSD; any 3.5-inch adapter bracket, SATA data cable or migration software must be purchased separately.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
