Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White LED 120 mm case fan with green frame and hidden screws

Vetroo

Vetroo DF120 120mm case fan white LED green frame 1300 RPM 48.1 CFM hydro bearing

SKU CH-FGJQ-HYW7B MPN DF120

120 mm hydro-bearing case fan with static white LEDs and a green frame, 1300 RPM and 48.1 CFM airflow at 20–25 dBA

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM<1600 RPM

Color Green

Option 1 Pack

  • 1 Pack
  • 3 Packs
  • 5 Packs

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Quiet operation at 20-25 dBA with hydro bearing
  • High airflow of 48.1 CFM at 1300 RPM
  • Static white LED lighting with green frame
  • Hidden screw design for clean aesthetics
  • Long lifespan up to 50000 hours with hydro bearing

Compact 120 mm case fan with white LED

The Vetroo DF120 is a 120 mm case fan designed for standard chassis mounting points. It delivers a maximum airflow of 48.1 CFM at 1300 RPM while operating between 20 and 25 dBA. The hydro bearing is rated for up to 50000 hours of service life. The green frame and static white LED suit builders wanting a coordinated colour accent.

Straightforward 3-pin or 4-pin installation

The fan includes four mounting screws and connects via a 3-pin header to the motherboard or a 4-pin connector to the power supply. The 25 mm thickness fits typical case, radiator or CPU cooler slots without clearance issues. Hidden screw heads keep the visible surface flat. Builders who need PWM speed control from a 4-pin motherboard header will not get it from the 3-pin connection.

Steady airflow at constant 1300 RPM

The fan runs at a fixed 1300 RPM (±10 %) drawing 0.2 A at 12 V for 4.2 W of power. Hydro bearing construction maintains consistent speed and noise levels during extended operation. The 48.1 CFM maximum airflow is sustained rather than a short burst figure. Systems requiring variable speed curves tied to temperature sensors will not benefit from automatic fan curves.

Kohokohdat

  • Quiet operation at 20-25 dBA with hydro bearing
  • High airflow of 48.1 CFM at 1300 RPM
  • Static white LED lighting with green frame
  • Hidden screw design for clean aesthetics
  • Long lifespan up to 50000 hours with hydro bearing

Tekniset tiedot

BrandVetroo
SeriesDF120
ModelDF120
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM<1600 RPM
Air Flow45-50 CFM
Noise Level20 - 25 dBA
Power Connector3 / 4 Pin
ColorGreen
LEDWhite
Dimensions120 * 120*25 mm

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I confirm the fan is spinning at the correct 1300 RPM after installation?

Use BIOS hardware monitoring or software such as HWMonitor to verify the fan reports approximately 1300 RPM and stays within the 20 to 25 dBA noise range under load.

What comes in the box and do I need to buy any extra mounting hardware?

The package includes one DF120 fan and four fan screws; no additional mounting hardware is required for standard 120 mm case or radiator slots.

Should I choose the 3-pin or 4-pin connector for motherboard control?

Use the 3-pin header for motherboard voltage control; the 4-pin plug is intended for direct PSU power when motherboard headers are unavailable.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.