Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular memory module with gold edge connectors and black chips

VisionTek

VisionTek 16 GB DDR4 2400 MHz 288-pin DIMM

SKU CH-MGZB-4W8YH

Adds 16 GB of DDR4 memory at 2400 MHz in a single 288-pin DIMM running at 1.20 V for faster desktop performance

  • 16 GB DDR4 module adds capacity for smoother multitasking
  • 2400 MHz DDR4-2400/PC4-19200 speed supports responsive application performance
  • 20 V low-voltage operation reduces power draw and heat
  • 288-pin unbuffered DIMM fits standard desktop memory slots
  • JEDEC-standard non-ECC design ensures broad Intel X99 motherboard compatibility

VisionTek 16 GB DDR4 2400 MHz Module

This VisionTek 16 GB DDR4 2400 MHz DIMM is a JEDEC standard unbuffered memory module built for desktop systems. It operates at 1.20 V and uses a 288-pin form factor. The single 16 GB stick adds capacity for memory-intensive workloads and multitasking.

Install in minutes with standard DIMM slots

Installation follows the usual DIMM procedure: align the notch, press firmly until the retention clips click, and power on. The module runs at the JEDEC 2400 MHz rating without manual tuning. A common issue is mixing this stick with existing modules of different speeds or timings, which can force the system to run at the lowest common denominator or fail to boot.

Ideal for upgrading compatible Intel X99 desktops

This kit suits owners of Intel X99 motherboards who need a straightforward 16 GB capacity increase for faster file transfers and application launches. It is not for builders who require ECC error correction, registered buffering, or speeds beyond the 2400 MHz JEDEC specification. Systems limited to lower DDR4 speeds or different pin counts should look at other options.

Kohokohdat

  • 16 GB DDR4 module adds capacity for smoother multitasking
  • 2400 MHz DDR4-2400/PC4-19200 speed supports responsive application performance
  • 20 V low-voltage operation reduces power draw and heat
  • 288-pin unbuffered DIMM fits standard desktop memory slots
  • JEDEC-standard non-ECC design ensures broad Intel X99 motherboard compatibility

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How can I confirm the module is running at 2400 MHz after installation?

Check the memory frequency in the BIOS or with a system utility such as CPU-Z; it should report DDR4-2400 or PC4-19200 at 1.20 V.

What comes in the box and is anything else required?

The package contains a single 16 GB 288-pin DDR4 DIMM; no cables or additional parts are included and nothing extra is needed for a standard desktop install.

Should I pick the 16 GB 2400 MHz DDR4 DIMM for an Intel X99 motherboard?

Yes, the module is a JEDEC-standard 16 GB DDR4-2400 DIMM listed as compatible with Intel X99 motherboards.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.