Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black steel clamp-on reel holder with vertical pole and horizontal support bar for 3D printer filaments

VIVO

VIVO Steel Height Adjustable Clamp-on Reel Holder 3d printers accessory

SKU CH-E6NX-AXJZS

A clamp-on steel spool stand holds up to eight 2.2 lb reels, four 6.6 lb reels or two 11 lb reels with 22 lb total capacity and 26.3 in height adjustment

  • ColorBlack
  • TypeStrand
  • Holds up to eight 2.2 lb reels for easy multi-filament access
  • Supports 22 lbs total weight with durable steel construction
  • Clamps securely to desks up to 3.4 in thick for stable mounting
  • Height adjustable along 26.3 in pole to suit top or side loaded printers
  • Simple four step assembly with included hardware gets you printing fast

VIVO clamp-on reel holder for 3D printing

The VIVO Steel Height Adjustable Clamp-on Reel Holder is a filament management accessory for FDM 3D printers. It mounts to a desk edge with a C-clamp and keeps spools ready beside or above the machine. The steel frame supports up to 22 lbs of filament. It suits hobbyists and small shops that want organised material storage without a separate rack.

Suits printers with top

The clamp fits desktops from .4 to 3.4 in thick and the pole height is 26.3 in. It holds eight 2.2 lb reels, four 6.6 lb reels, or two 11 lb reels. Builders who need more than eight 1 kg spools at once or who work on surfaces thicker than 3.4 in should look at a floor-standing system instead.

Four-step assembly with included hardware

The package contains all bolts, the C-clamp, the 26 in support bar, and printed instructions. Mount the clamp, slide the pole, set the bar height, and tighten the screws. The most common issue is forgetting to level the clamp on an uneven desk edge, which can make the holder wobble under full load.

Kohokohdat

  • Holds up to eight 2.2 lb reels for easy multi-filament access
  • Supports 22 lbs total weight with durable steel construction
  • Clamps securely to desks up to 3.4 in thick for stable mounting
  • Height adjustable along 26.3 in pole to suit top or side loaded printers
  • Simple four step assembly with included hardware gets you printing fast

Tekniset tiedot

BrandVIVO
ColorBlack
TypeStrand

Kysymyksiä tästä tuotteesta

What desk thickness can the clamp attach to?

The C-clamp fits desks from 0.4 to 3.4 inches thick for a stable mount.

Will it hold my existing 1kg and 3kg spools together?

Yes, it holds up to eight 2.2 lb reels, four 6.6 lb reels, or two 11 lb reels simultaneously.

How do I verify the height is set correctly for my top-loaded printer?

Adjust the support bar along the 26.3 inch pole so reels sit above the printer and the total weight stays within the 22 lb limit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.