Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

VOVOV

VOVOV Antminer S19 95th/s 3250W mining hardware

SKU CH-K9Z5-03HKR

ASIC miner delivers 95 TH/s Bitcoin hashing at 3250 W and includes a PSU

  • Delivers 95 TH/s for high Bitcoin output
  • Draws 3250 W so plan adequate power capacity
  • Requires 220 V input to avoid hardware damage
  • Includes PSU for simpler deployment
  • Listed by manufacturer in 2023

VOVOV Antminer S19 95th/s Overview

This VOVOV Antminer S19 is a crypto mining machine built for Bitcoin mining. It arrives new and includes a PSU in the package. The unit is intended for operators who run dedicated mining infrastructure.

Suitable Operators And Constraints

This hardware suits miners who can provide a 220V input supply and handle a 3250w power draw. It is not for sites limited to lower voltage service or restricted electrical capacity. Buyers who cannot meet the 220V requirement should look at other equipment.

Critical Voltage Requirement

The manufacturer specifies a required input voltage of 220V for this model. Supplying the wrong voltage will probably cause damage to the miner. Confirm your facility delivers 220V before ordering.

Kohokohdat

  • Delivers 95 TH/s for high Bitcoin output
  • Draws 3250 W so plan adequate power capacity
  • Requires 220 V input to avoid hardware damage
  • Includes PSU for simpler deployment
  • Listed by manufacturer in 2023

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What input voltage must my facility provide for the Antminer S19 95th/s to operate safely?

The unit requires a 220V supply; using a different voltage can damage the miner.

Will the included PSU connect to my existing 220V circuit without an adapter?

The miner ships with its own power supply designed for 220V input, so no separate PSU purchase is needed.

How can I confirm the miner is hashing at the rated 95th/s after power-up?

Check the dashboard or pool statistics; they should report a hash rate near 95 TH/s when the device is running normally.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.