Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with M.2 slot and gold PCIe edge connector, includes low-profile metal bracket

Vszerda

Vszerda M.2 NVMe PCIe 3.0 x4 Adapter with Low Profile Bracket

SKU CH-SAG5-T5TKW

Adds an M-key NVMe SSD to a PCIe 3.0 x4 slot with low-profile bracket and LED status

  • Adds an M.2 NVME SSD to any PCIe desktop
  • Fits 2230 2242 2260 2280 drives via multiple mounting holes
  • Works in PCIe 3.0 x4 x8 x16 slots and is backward compatible with 1.0 and 2.0
  • Includes full-profile and low-profile brackets for flexible chassis installation
  • Built-in LEDs show power and data transfer status

Vszerda M.2 NVMe PCIe 3.0 x4 Adapter

This Vszerda adapter adds an M.2 M-key NVMe SSD slot to a desktop PC through a PCI Express 3.0 x4 connection. It suits builders upgrading older systems or adding fast storage where no native M.2 socket exists. The card works with Windows 10, 8.x and 7 without extra drivers. MacBook computers are not supported.

Full-profile and low-profile brackets included

Both mounting brackets ship in the box so the card fits standard towers and slim chassis alike. Multiple onboard holes accept 2230, 2242, 2260 and 2280 length drives. Built-in LEDs show power and data activity at a glance. The adapter converts the physical interface only; drive speed is unchanged.

Check for M-key NVMe and motherboard NVMe boot

Only M-key NVMe SSDs work; B-key PCIe or SATA drives will not fit or function. The card plugs into x4, x8 or x16 slots and is backward compatible with PCIe 1.0 and 2.0. Systems released before 2015 may lack NVMe boot capability; verify with your system vendor before ordering.

Kohokohdat

  • Adds an M.2 NVME SSD to any PCIe desktop
  • Fits 2230 2242 2260 2280 drives via multiple mounting holes
  • Works in PCIe 3.0 x4 x8 x16 slots and is backward compatible with 1.0 and 2.0
  • Includes full-profile and low-profile brackets for flexible chassis installation
  • Built-in LEDs show power and data transfer status

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Does the PCIe 3.0 x4 interface limit the maximum throughput of an NVME SSD?

The adapter runs at PCIe 3.0 x4 speeds and is backward compatible with PCIe 1.0 and 2.0 slots, so the SSD will operate at the speed allowed by the slot used.

What length M.2 drives fit the onboard mounting holes?

The card provides mounting holes for 2230, 2242, 2260 and 2280 M-key NVME SSDs; B-key and SATA drives are not supported.

How is the low-profile bracket fitted and what step is often missed?

Swap the full-height bracket for the low-profile one using the supplied screws, then insert the card into a PCIe x4, x8 or x16 slot and secure the bracket to the chassis.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.