Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two black rectangular magnetic dust filters with ultra-fine PVC mesh, 240 by 120 millimetres

Westinghouse 120x240mm Magnetic Fan Accessory 2-Pack

SKU CH-EYWD-7C6NK MPN 120x240mm

Two magnetic PVC mesh filters cover 240 x 120 mm vents, trapping dust with 0.8 mm holes while adding only 76 g per pair

  • certificationtrue
  • weight0.02 pounds
  • dimensions14.33in W x 12.83in H x 9.06in D
  • materialMetal
  • Ultra-fine 0.8 mm mesh traps dust before it reaches components
  • Magnetic frame snaps onto iron cases for tool-free fitting
  • 5 mm thick PVC resists tearing and cleans with a quick rinse
  • Two filters protect both intake and exhaust on 240 × 120 mm vents
  • Lightweight 76 g design adds negligible mass to the build

Magnetic Dust Filters for 240x120mm Vents

This two-pack supplies magnetic dust filters sized for 240mm by 120mm fan openings. Each filter uses ultra-fine PVC mesh with a 0.8mm hole pattern and 1.5mm thickness to block dust while maintaining airflow. The magnetic frame attaches directly to steel case panels without screws or clips. The set helps keep internal components clean and can extend hardware lifespan.

Check Steel Panels and Clearance

Verify that the mounting surface is ferrous metal because the magnets will not hold on aluminium or non-magnetic alloys. Confirm the vent measures 240mm by 120mm so the filter covers the opening completely. Ensure at least 3mm of clearance exists behind the fan or vent to accommodate the filter frame without contacting blades or cables. The package includes four individual filters weighing 76g total.

Suits Steel-Case Builds Needing Tool-Free Dust

Builders with steel chassis who want quick, removable filtration for 240mm radiator or fan mounts will find this convenient. Users with aluminium, tempered-glass or plastic panels cannot use the magnetic attachment and should consider screw-on or adhesive alternatives. The mesh density targets general dust reduction rather than fine particulate capture for cleanroom environments.

Kohokohdat

  • Ultra-fine 0.8 mm mesh traps dust before it reaches components
  • Magnetic frame snaps onto iron cases for tool-free fitting
  • 5 mm thick PVC resists tearing and cleans with a quick rinse
  • Two filters protect both intake and exhaust on 240 × 120 mm vents
  • Lightweight 76 g design adds negligible mass to the build

Tekniset tiedot

BrandWestinghouse
Model120x240mm Magnetic Filter
certificationtrue
weight0.02 pounds
dimensions14.33in W x 12.83in H x 9.06in D
materialMetal

Kysymyksiä tästä tuotteesta

What comes in the pack and do I need any tools or extra parts to fit them?

The pack contains four magnetic PVC filters sized 240 x 120 mm; they snap onto any iron chassis without screws or tools, so nothing extra is required.

Should I pick the 120 mm or 240 mm version for my radiator?

Each filter measures 240 mm by 120 mm, matching standard 240 mm radiators and dual-fan vents, so this single size covers both dimensions.

How much airflow will I lose with the 0.8 mm mesh in place?

The ultra-fine 0.8 mm holes block dust while keeping resistance low; the 1.5 mm thick PVC layer adds minimal pressure drop for typical case fans.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.