Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two black rectangular magnetic mesh filters with reinforced frames, 240 by 120 millimetres each

Westinghouse HHD000067-2 240x120mm Magnetic Fan Accessory 2 Pack

SKU CH-FRE3-KVQNN MPN HHD000067-2

Magnetic 240x120mm PVC mesh filters with .8mm holes attach tool-free to steel cases for washable dust protection

  • featuresLED
  • weight0.02 pounds
  • dimensions14.33in W x 12.83in H x 9.06in D
  • materialMetal
  • Tool-free magnetic frame secures to steel cases without screws
  • 8mm PVC mesh delivers 30% more airflow than standard filters
  • Washable design allows quick rinse and instant reattachment for long-term use
  • Sized 240x120mm for dual 140mm fan vents and radiators
  • Two-pack covers both intake and exhaust vents in one purchase

240x120mm Magnetic Dust Filter 2 Pack

This two-pack of magnetic dust filters is designed for PC builders who want tool-free dust protection on 240x120mm fan vents or radiator mounts. The 0.8mm PVC mesh targets a balance between airflow and particle capture for standard ATX cases with steel panels.

Tool-free magnetic frame with 3M adhesive backup

A 1.5mm thick magnetic frame snaps onto any ferrous case surface, while the included 3M adhesive strips let you secure the frame on non-magnetic or curved corners. Installation takes seconds without screws, though trimming with scissors may be needed for rounded vent edges.

0.8mm mesh for dual 140mm or 240mm radiator vents

The 0.8mm hole diameter allows up to 30% more airflow than finer 0.5mm filters while blocking dust, pet hair and lint. Two filters cover a typical dual 140mm intake or a 240mm radiator; they will not fit 280mm or 120mm mounts and are unsuitable for aluminium or plastic case panels.

Kohokohdat

  • Tool-free magnetic frame secures to steel cases without screws
  • 8mm PVC mesh delivers 30% more airflow than standard filters
  • Washable design allows quick rinse and instant reattachment for long-term use
  • Sized 240x120mm for dual 140mm fan vents and radiators
  • Two-pack covers both intake and exhaust vents in one purchase

Tekniset tiedot

BrandWestinghouse
ModelHHD000067-2
featuresLED
weight0.02 pounds
dimensions14.33in W x 12.83in H x 9.06in D
materialMetal

Kysymyksiä tästä tuotteesta

How do I confirm the magnetic frame is seated correctly on my steel case after installation?

The 1.5mm thick magnetic frame with 3M adhesive backing should sit flat and vibration-free on any iron or steel surface; a firm press around the perimeter locks it in place without tools.

What comes in the package and do I need to supply my own mounting hardware?

The box contains two 240x120mm HFEIX magnetic dust filters with integrated frames; no screws, brackets or extra adhesive are required because the full magnetic frame attaches directly to metal chassis vents.

Which filter size matches a dual 140mm fan radiator or large intake vent?

Choose the 240x120mm (9.4 x 4.7 inch) version — it is sized for dual 140mm fan setups, liquid cooling radiators and large intake vents on standard ATX cases.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.