Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two white nylon mesh sheets with black magnetic strips for PC case vents

Westinghouse YX-Woanger-4437 300×400mm dust filter 2 pcs

SKU CH-QTG2-NYGH0 MPN YX-Woanger-4437

A set of two nylon mesh panels measuring 300 by 400 millimetres with magnetic strips for tool-free mounting on steel chassis, speaker grilles or console vents

  • Product nameYX-Woanger-4437 Woanger
  • certificationnot_applicable, true
  • includedfalse
  • weight0.36 pounds
  • descriptionWoanger, YX-Woanger-4437, 3.54 L x 3.54 W x 2.17 H inches, 0
  • finishBlack
  • Keeps components clean with 80 mesh nylon filtration
  • Magnetic strips allow tool-free mounting on steel cases
  • Cut-to-size 300×400 mm sheets fit custom openings
  • Two filters plus eight strips cover multiple intakes
  • Fine .2 mm holes block dust without choking airflow

DIY Nylon Filter Sheets

The Westinghouse YX-Woanger-4437 supplies two rectangular nylon mesh sheets measuring 40 by 30 centimetres. Each sheet uses an 80 mesh weave with .2 millimetre holes to catch dust and hair while letting air pass. Builders cut the material to fit any intake opening on a PC chassis, speaker cabinet or game console.

Suited For Custom Openings

This kit suits anyone who wants a single filter that can be trimmed to match non-standard vent shapes. The included magnetic strips attach to ferrous panels without drilling, so renters or frequent upgraders can remove the mesh for cleaning in seconds. It is not suited for buyers who need a rigid frame or a filter pre-cut to a specific fan size.

80 Mesh Nylon With Magnetic Mount

The deciding specification is the 80 mesh nylon fabric combined with adhesive-backed magnetic strips. The fine weave blocks fine particulates, while the magnetic mounting works only on steel or iron surfaces. If the case front is aluminium, plastic or mesh-only, the strips will not hold and a different mounting method is required.

Kohokohdat

  • Keeps components clean with 80 mesh nylon filtration
  • Magnetic strips allow tool-free mounting on steel cases
  • Cut-to-size 300×400 mm sheets fit custom openings
  • Two filters plus eight strips cover multiple intakes
  • Fine .2 mm holes block dust without choking airflow

Tekniset tiedot

BrandWestinghouse
ModelYX-Woanger-4437
Product nameYX-Woanger-4437 Woanger
certificationnot_applicable, true
includedfalse
weight0.36 pounds
descriptionWoanger, YX-Woanger-4437, 3.54 L x 3.54 W x 2.17 H inches, 0.36 pounds
finishBlack
ColorBlack
dimensions14.33in W x 12.83in H x 9.06in D

Kysymyksiä tästä tuotteesta

How do I install the 300×400 mm nylon filter on my case using the supplied magnetic strips?

Cut the 40 × 30 cm mesh to fit the fan opening, peel the adhesive backing from the eight 40 × 1 cm magnetic strips, stick the strips to the case, then snap the filter onto the magnets.

What cleaning or replacement will the 80-mesh nylon filter need over time?

Remove the filter from the magnetic strips, rinse the nylon mesh with water or brush off dust, let it dry, then reattach; the material resists tearing so replacement is rarely required.

At what point does the .2 mm hole size start to restrict airflow under sustained load?

The ultra-fine .2 mm openings block hair and dust while maintaining ventilation; noticeable restriction only occurs when the mesh surface becomes heavily clogged with debris.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.