Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four silver compression fittings for 16mm hard tubing

WYYG

WYYG G1/4" Copper Compression Fittings 16mm 4pcs Silver

SKU CH-SW66-JZRFK

Four G1/4" compression fittings secure 16 mm rigid tubing and withstand up to 15 kg of pull force

  • TypeFittings
  • ColorSilver
  • G1/4" threads fit standard liquid-cooling loops
  • Compression design secures 16mm OD hard tubing
  • Brass construction resists corrosion for long life
  • Rated to sustain 15kg drag force without leaks
  • Pack includes four fittings for complete loop assembly

Water-Cooling Fittings for 16mm Tubing

These G1/4-inch copper compression fittings connect 16mm outer-diameter rigid tubing in a custom liquid-cooling loop. The pack contains four silver-coloured pieces made from brass for corrosion resistance. Each fitting uses a compression design that seals without tools and is rated to sustain a drag force of 15kg. They suit builders assembling a high-flow, leak-free hard-line system.

Who Should Use These

The fittings are intended for enthusiasts building a custom water-cooling loop with 16mm hard tubing and G1/4 threaded components. They are not suited for systems using soft tubing, smaller or larger tube diameters, or non-G1/4 thread standards. Buyers needing angled, rotary or quick-disconnect styles will require different fittings.

Deciding Specification

The critical specification is the 16mm outer-diameter tubing compatibility combined with the G1/4 thread size. If the loop uses any other tube diameter or thread pitch these fittings will not fit and cannot be adapted.

Kohokohdat

  • G1/4" threads fit standard liquid-cooling loops
  • Compression design secures 16mm OD hard tubing
  • Brass construction resists corrosion for long life
  • Rated to sustain 15kg drag force without leaks
  • Pack includes four fittings for complete loop assembly

Tekniset tiedot

TypeFittings
ColorSilver

Kysymyksiä tästä tuotteesta

Will the G1/4" threads on these fittings match the standard ports on my existing water blocks and radiators?

Yes, the G1/4" thread is the industry standard for PC water-cooling components, so they will screw directly into the ports on your current blocks, radiators and reservoirs.

How can I verify the compression seal is holding after I assemble the loop with 16mm hard tubing?

Pressurise the loop with a leak tester and watch the pressure gauge; a steady reading with no drips at the four silver fittings confirms the high-flow, leak-free structure is working.

The pack lists four fittings — are any extra O-rings, tubing inserts or tools included?

The box contains only the four G1/4" compression fittings; spare O-rings, tubing chamfer tools or cutting tools for the 16mm rigid tubing must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.