Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White full-tower ATX case with tempered glass side panel and exoskeleton frame

XPG

XPG Battlecruiser II ATX Full Tower PC Case White

SKU CH-J7BQ-48QDZ

White ATX full-tower case with tempered glass, front 420 mm radiator support, adjustable GPU holder up to 395 mm and smart cable routing

  • TypeATX Full Tower
  • ColorWhite
  • Case MaterialSPCC
  • Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
  • Side Panel4mm Tempered Glass Side Panel
  • Internal 3.5" Drive Bays2+3
  • Supports 420 mm front radiator for high-capacity liquid cooling
  • Adjustable GPU holder spans 52 to 134 mm to secure heavy graphics cards
  • Cable-management hub and PSU cover keep wiring hidden for a clean build
  • Front I/O includes USB 3.2 Gen 2 Type-C and two USB 3.2 Type-A ports for fast peripheral connection
  • Fits E-ATX motherboards and GPUs up to 395 mm long for maximum hardware flexibility

Built for large builds

The XPG Battlecruiser II is an ATX full-tower chassis that accepts E-ATX, ATX, Micro-ATX and Mini-ITX boards. Its SPCC frame and 4mm tempered glass side panel enclose a layout designed for high-airflow cooling and clean cable routing. The white finish suits showcase systems that prioritise visual impact.

Suits liquid-cooled showcases.

Builders planning a 420mm front radiator or a graphics card up to 395mm long will find the clearance they need. The adjustable GPU holder supports cards from 52 to 134mm in height. The 25.35-inch width and 30.09-pound weight rule out small desks and frequent transport.

Deciding spec: 420mm front radiator support

A single 420mm radiator can be mounted at the front, setting the thermal ceiling for the whole build. Top mounts accept up to 360mm and the rear takes 120mm. If the cooling plan centres on a 420mm loop, this case matches it; if not, a smaller chassis may be more practical.

Kohokohdat

  • Supports 420 mm front radiator for high-capacity liquid cooling
  • Adjustable GPU holder spans 52 to 134 mm to secure heavy graphics cards
  • Cable-management hub and PSU cover keep wiring hidden for a clean build
  • Front I/O includes USB 3.2 Gen 2 Type-C and two USB 3.2 Type-A ports for fast peripheral connection
  • Fits E-ATX motherboards and GPUs up to 395 mm long for maximum hardware flexibility

Tekniset tiedot

BrandXPG
SeriesBattle Cruiser II
ModelBATTLECRUISERIIST-WHCWW
TypeATX Full Tower
ColorWhite
Case MaterialSPCC
Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
Side Panel4mm Tempered Glass Side Panel
Internal 3.5" Drive Bays2+3
Internal 2.5" Drive Bays3+3
Front Ports1 x USB 3.2 Gen 2 Type-C, 2 x USB 3.2 Type-A, 1 x Audio, 3 x Buttons
Fan OptionsFront: 120mm x3, 140mm x3
Top: 120mm x3, 140mm x2
Rear: 120mm x1
Radiator OptionsFront: 420 / 360 / 280 / 240mm
Top: 360 / 280 / 240mm
Rear: 120mm
Max GPU Length395mm (without front radiator)
Max CPU Cooler Height175 mm
Max PSU Length225 mm
Dimensions25.35*13.34*24.21 inches
Weight30.09 lbs
Lähetyspaino14.02 kg
Pakkauksen mitat635 × 330 × 305 mm

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.