Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black low-profile DDR5 U-DIMM with RGB lighting, 16GB

XPG

XPG Lancer Blade RGB DDR5 16GB 6400MHz U-DIMM

SKU CH-NDSR-0NN29

DDR5 desktop memory with a 16 GB capacity, 6400 MHz speed and a low-profile heatsink that fits compact cases and clears tower CPU coolers

  • Capacity16GB
  • Speed6400MHz
  • 16 GB DDR5 at 6400 MT/s for responsive multitasking
  • Low-profile 7.86 mm heatsink clears large CPU coolers
  • Built-in PMIC improves power stability at 1.1 V
  • On-die ECC corrects errors for reliable operation
  • RGB lighting with static, breathing, comet and music sync

Compact Low-Profile DDR5 for Tight Builds

The XPG Lancer Blade RGB is a 16GB DDR5 U-DIMM rated at 6400MHz with CL32-39-39 timings at 1.1V-1.4V. Its low-profile heatsink measures 7.86mm in height, allowing installation in small-form-factor cases and clearing large tower CPU coolers. The module suits builders who need high-speed memory without clearance conflicts.

Sustained Load Stability with PMIC

A built-in Power Management IC regulates voltage locally, keeping the sticks at 1.1V-1.4V during extended sessions. On-die error correcting code corrects single-bit errors in real time, while the operating range of 0°C to 85°C provides headroom for prolonged workloads. The aluminium heatsink dissipates heat across the 133.35mm length without active cooling.

Straightforward Install, Watch Voltage

The U-DIMM slots into any standard DDR5 desktop socket and weighs 41.11g, so no back-plate or brackets are required. RGB lighting is controlled through motherboard vendor software for static, breathing, comet and music-reactive effects. Buyers who need capacities beyond 16GB or speeds above 6400MHz should look elsewhere.

Kohokohdat

  • 16 GB DDR5 at 6400 MT/s for responsive multitasking
  • Low-profile 7.86 mm heatsink clears large CPU coolers
  • Built-in PMIC improves power stability at 1.1 V
  • On-die ECC corrects errors for reliable operation
  • RGB lighting with static, breathing, comet and music sync

Tekniset tiedot

Capacity16GB
Speed6400MHz

Kysymyksiä tästä tuotteesta

How much heat does the 6400MHz DDR5 module produce during all-day operation?

The kit runs at 1.1 V to 1.4 V and is rated for 0 °C to 85 °C operating temperature with a low-profile heatsink that fits tight cases.

Which motherboard features are required for the 16GB U-DIMM to reach 6400 MT/s?

A DDR5 motherboard with XMP 3.0 or EXPO support is needed; the SPD defaults to 4800 MT/s at 1.1 V until the profile is enabled.

Will the 7.86 mm tall heatsink clear a large tower CPU cooler on an older platform?

The compact 7.86 mm height is designed to avoid interference with tower coolers, but the module only works in DDR5 slots, not DDR4 boards.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.