Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White and blue triple-fan graphics card with ARGB lighting and dual BIOS switch

YESTON

YESTON Sakura Radeon RX 9070 XT 16GB graphics card

SKU CH-DZ31-TTP12

AMD RDNA 4 graphics card with 16 GB GDDR6 on a 256-bit bus, boost clock up to 2970 MHz, triple-fan cooler with ARGB, dual BIOS switch, PCIe 5.0 and three DisplayPort 2.1 plus HDMI 2.1a outputs

  • InterfacePCI Express 5.0 x16
  • Chipset ManufacturerAMD
  • GPU SeriesAMD Radeon RX 9000 Series
  • GPURX9070XT
  • ArchitectureRDNA 4
  • Game ClockUp to 2400 MHz

Edition Sakura

  • 16 GB GDDR6 memory at 20 Gbps for high-resolution textures
  • Boost clock up to 2970 MHz with dual BIOS for flexible performance
  • RDNA 4 architecture on 4 nm process with 4096 stream processors
  • PCIe 5.0 x16 interface plus three DisplayPort 2.1 and one HDMI 2.1a outputs
  • Triple-fan cooler in white and blue design measuring 332 x 138 x 65 mm

Yeston Sakura RX 9070 XT 16 GB Gaming GPU

The Yeston Sakura Radeon RX 9070 XT targets enthusiasts who want 16 GB of GDDR6 memory on a 256-bit bus for high-refresh 1440p and entry-level 4K gaming. It runs on the AMD RDNA 4 architecture built on a 4 nm process with 4096 unified shaders. A PCIe 5.0 x16 interface and triple-fan cooler complete the package.

Dual BIOS Switch Simplifies Setup

A physical STD/VAR switch on the card lets you choose between standard clocks of 2400–2970 MHz and a higher VAR profile of 2520–3060 MHz without software flashing. The card draws power through three 8-pin connectors, so verify your PSU cables before mounting. Its 332 mm length fits most mid-tower cases but measure clearance first.

16 GB GDDR6 Handles Heavy Texture Loads

The 16 GB frame buffer at 20 Gbps across a 256-bit interface provides headroom for modern titles at 7680×4320 output resolution. Memory bandwidth saturates before the core in memory-bound workloads, so ultra-high texture packs at 4K may hit the ceiling. For pure rasterisation at 1440p the capacity remains comfortable.

Kohokohdat

  • 16 GB GDDR6 memory at 20 Gbps for high-resolution textures
  • Boost clock up to 2970 MHz with dual BIOS for flexible performance
  • RDNA 4 architecture on 4 nm process with 4096 stream processors
  • PCIe 5.0 x16 interface plus three DisplayPort 2.1 and one HDMI 2.1a outputs
  • Triple-fan cooler in white and blue design measuring 332 x 138 x 65 mm

Tekniset tiedot

BrandYeston
ModelRX9070XT
InterfacePCI Express 5.0 x16
Chipset ManufacturerAMD
GPU SeriesAMD Radeon RX 9000 Series
GPURX9070XT
ArchitectureRDNA 4
Game ClockUp to 2400 MHz
Boost ClockUp to 2970 MHz
Stream Processors4096
Memory Size16GB
Memory Interface256-Bit
Memory TypeGDDR6
DirectXDirectX 12
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI1 x HDMI 2.1a
DisplayPort3 x DisplayPort 2.1
ColorWhite/Blue
Max Resolution7680 x 4320
Virtual Reality ReadyYes
CoolerTriple Fans
Thermal Design Power304W
Recommended PSU Wattage750W
HDCP ReadyYes
Form FactorATX
Max GPU Length332 mm
Card Dimensions (L x H)332×138×65 mm
Slot Width3 Slots

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the card is running at the advertised 2400 MHz game clock and 2970 MHz boost clock after installation?

Use GPU monitoring software to check the core frequency under load; the default STD BIOS targets 2400 MHz game clock and 2970 MHz boost clock, while the VAR BIOS targets 2520 MHz and 3060 MHz.

What comes in the box with the Sakura RX 9070 XT and what must I source separately?

The box contains the graphics card with triple-fan cooler, ARGB lighting and dual-BIOS switch; you must provide a power supply with three 8-pin PCIe connectors and a case that fits the 332 mm length.

Which BIOS setting should I choose between the STD and VAR profiles on this card?

The STD profile runs at 2400-2970 MHz core clocks for standard operation; the VAR profile raises them to 2520-3060 MHz for higher performance if your cooling and power delivery can sustain it.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.