Yottamaster
Yottamaster M.2 10Gbps USB 3.1 Gen 2 NVME drive enclosure
Aluminium enclosure holds one M.2 NVME drive up to 4 TB, delivers 10 Gbps USB 3.1 Gen 2 speeds with UASP and TRIM, includes RGB lighting and a 2-in-1 USB-C/A cable supporting 60 W PD charging
- ColorSilver
- SizeM.2 NVME 10GBPS
- TypeEnclosure
- MaterialAluminum
- Thunderbolt 3NO
- Internal InterfaceM.2 NVME 10GBPS
Material Aluminum
- Aluminum
- Metal / Plastic
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
Size M.2 NVME 10GBPS
- M.2 NVME 10GBPS
- NVME
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
- Up to 985 MB/s read and write with USB 3.1 Gen 2 10Gbps
- RGB lighting on the enclosure adds a gaming aesthetic to your setup
- Supports M.2 NVME drives in 2230, 2242, 2260 and 2280 sizes
- Aluminium sandwich cooling keeps the SSD under 53 °C after 24 hours of full workload
- Includes a 2-in-1 USB-C and USB-A cable with 60W power delivery
Portable NVMe enclosure
The Yottamaster M.2 enclosure connects a single NVMe SSD over USB 3.1 Gen 2 at 10Gbps. An aluminum body with thermal pad and fin structure keeps the drive under 53°C after 24 hours of full workload. RGB lighting on the top adds a gaming accent. A 2-in-1 USB-C to USB-C/A cable with 60W Power Delivery is included.
Suits builders adding fast external storage
This enclosure fits 2230, 2242, 2260 and 2280 M-Key or B+M-Key NVMe SSDs up to 4TB. UASP and TRIM support maintain performance on Windows, Mac and Linux. Buyers who need Thunderbolt 3 connectivity or a built-in cooling fan should look at other designs. The single-bay layout also means only one drive can be used at a time.
10Gbps USB 3.1 Gen 2 interface
The external connection tops out at 10Gbps, delivering real-world sequential speeds up to 985MB/s with a capable NVMe drive. This bandwidth ceiling is the deciding factor: if your workflow demands Thunderbolt or USB4 speeds, this enclosure will not meet that need.
Kohokohdat
- Up to 985 MB/s read and write with USB 3.1 Gen 2 10Gbps
- RGB lighting on the enclosure adds a gaming aesthetic to your setup
- Supports M.2 NVME drives in 2230, 2242, 2260 and 2280 sizes
- Aluminium sandwich cooling keeps the SSD under 53 °C after 24 hours of full workload
- Includes a 2-in-1 USB-C and USB-A cable with 60W power delivery
Tekniset tiedot
| Series | M.2 NVME 10GBPS |
|---|---|
| Model | M.2 NVME 10GBPS |
| Color | Silver |
| Size | M.2 NVME 10GBPS |
| Type | Enclosure |
| Material | Aluminum |
| Thunderbolt 3 | NO |
| Internal Interface | M.2 NVME 10GBPS |
| External Interface | NVME 10GBPS |
| HDD Count Supported | Single HDD |
| Number of Bay | 1 |
| Fan | No |
| Features | M.2 NVME 10GBPS |
Kysymyksiä tästä tuotteesta
How do I install an M.2 NVMe SSD and which step is most often missed?
Slide the 2230, 2242, 2260 or 2280 M-Key or B+M-Key drive into the M.2 slot, secure it with the screw, then apply the thermal pad onto the controller before closing the aluminum sandwich case — skipping the pad is the common mistake.
What maintenance or replacement will this enclosure need later?
The thermal pad can dry out after long use; replace it with a same-thickness pad to keep the 10 °C – 30 °C cooling effect and maintain the under-53 °C temperature after 24 hours of full workload.
What limit appears first during sustained heavy transfers?
The thermal ceiling: the enclosure is rated to stay under 53 °C after 24 hours of continuous full-load operation, so prolonged writes will hit that temperature ceiling before the 10 Gbps USB 3.1 Gen 2 interface saturates.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
