Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Wood grain 75 percent wireless mechanical keyboard with round electroplated chrome keycaps and tactile switches

YUNZII

YUNZII QL75 75% Wireless Mechanical Keyboard Wood Grain Onyx Tactile Switch

SKU CH-V6JE-HX1B4

A 75% tri-mode mechanical keyboard with 84 electroplated round keycaps, hot-swappable switches, QMK/VIA programmability and a built-in device stand

  • NameQL75
  • MaterialABS
  • Keyboard InterfaceUSB Type-C
  • Design StyleRetro
  • Layout75%
  • Palm RestNo

Color Wood Grain

Switch YUNZII Onyx Tactile Switch

  • Retro typewriter aesthetic with round electroplated keycaps
  • 75% layout packs 84 keys into 328.1×214.5 mm
  • Tri-mode connectivity: wired USB-C, Bluetooth, 2.4 GHz wireless
  • QMK/VIA programmable with north-facing RGB backlighting
  • 4000 mAh battery powers the keyboard for extended wireless use

75% Retro Typewriter Layout

The YUNZII QL75 is a 75% mechanical keyboard with 84 keys arranged in a staggered typewriter profile. It targets enthusiasts who want a compact footprint without losing the function row or navigation cluster. QMK and VIA support allows full key remapping and macro creation for workflow or gaming setups.

Hot-Swappable Build With Triple Connectivity

The ABS chassis uses a top-mounted structure and full-key hot-swap sockets compatible with three- and five-pin switches. Connectivity covers wired USB Type-C, Bluetooth and 2.4 GHz wireless, letting the board pair with multiple devices and switch between them via the built-in toggle and knob controls. Round electroplated keycaps and a built-in stand complete the desktop aesthetic.

4000mAh Battery And North-Facing RGB

A 4000mAh lithium-ion cell powers the board across all wireless modes, while north-facing RGB LEDs shine through the laser-engraved legends. The tactile Onyx switches are pre-lubed for a smooth, pronounced bump without excessive ping. At 1461.5g the keyboard stays planted during rapid input, and the 64.1mm height keeps wrist angle comfortable for long sessions.

Kohokohdat

  • Retro typewriter aesthetic with round electroplated keycaps
  • 75% layout packs 84 keys into 328.1×214.5 mm
  • Tri-mode connectivity: wired USB-C, Bluetooth, 2.4 GHz wireless
  • QMK/VIA programmable with north-facing RGB backlighting
  • 4000 mAh battery powers the keyboard for extended wireless use

Tekniset tiedot

BrandYUNZII
SeriesRetro Mechanical Keyboard
NameQL75
ModelQL75
MaterialABS
Keyboard InterfaceUSB Type-C
Design StyleRetro
Layout75%
Palm RestNo
Normal Keys84
Mechanical KeyboardYes
Key SwitchYUNZII Cocoa Cream V2 Switch/YUNZII Onyx Switch
Key Switch TypeLinear/Tactile
KeycapsABS Typewriter Style Electroplated Matte Chrome Laser Engraved Keycaps
Keyboard ColorPink, Green, White, Wood Grain
BacklitYes
Dimensions328.1*214.5*64.1mm/12.92*8.44*2.52inch
Type2.4 GHz / Bluetooth / Wired
Power SourceLithium-ion Rechargeable Battery

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the USB Type-C wired interface cap in practice?

The USB Type-C wired mode provides a direct data link and charges the 4000mAh battery, so latency is limited only by the host USB controller.

What physical space and mounting does the 75% 84-key frame need?

The keyboard measures 328.1 mm wide by 214.5 mm deep and stands 64.1 mm high at its tallest point, weighing 1461.5 g with a built-in stand for desk placement.

How do I swap switches on the hot-swappable PCB, and what step do people miss?

Pull the keycap, use the included switch puller to remove the old switch, align the new 3-pin or 5-pin switch pins with the socket, and press firmly until seated; the step often missed is checking that every pin is straight before pressing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.