Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black steel mid-tower case with tempered glass side panel and front mesh

Zalman

Zalman Fit-Basic-BK ATX Mid-Tower PC Case Black

SKU CH-XGA4-PVCZE

ATX mid-tower with perforated front mesh, side intake vents, 1 x 120mm rear fan, tempered glass hinged panel, hidden PSU shroud, 325mm GPU and 360mm radiator support

  • Motherboard CompatibilityATX
  • Power Supply MountedBottom
  • ColorBlack
  • Case MaterialSteel / Plastic
  • TypeATX Mid Tower
  • Side PanelTempered Glass Panel
  • Showcase your build through a scratch-resistant tempered glass side panel with hinged tool-less entry
  • Fit ATX, mATX and Mini-ITX boards in a compact 17.91 x 7.87 x 14.88 inch mid-tower with seven expansion slots
  • Channel fresh air to CPU and GPU via perforated front mesh and side vents plus a pre-installed 120mm rear exhaust fan
  • Install graphics cards up to 325mm, CPU coolers up to 160mm and front radiators up to 360mm for high-end builds
  • Keep the interior tidy with a hidden PSU shroud and three 2.5 inch plus two 3.5 inch drive bays

Compact mid-tower for ATX builds

The Zalman Fit-Basic-BK is a black ATX mid-tower chassis built for system builders who want a clean, airflow-focused enclosure without RGB lighting or premium pricing. It accepts ATX, mATX and Mini-ITX motherboards and mounts the power supply at the bottom behind a hidden shroud. The steel and plastic construction keeps weight down while the tempered glass side panel offers a clear view of the finished build.

GPU 325mm, radiator 360mm, cooler 160mm

A graphics card up to 325 mm long fits comfortably, while CPU coolers up to 160 mm tall and front-mounted radiators up to 360 mm are supported. Seven PCI expansion slots give room for full-size add-in cards. The perforated front mesh and side intake vents feed the single pre-installed 120 mm rear exhaust fan; additional front fans or a larger radiator can be added when thermal headroom is needed.

Tool-less glass door and front I/O

The hinged tempered glass panel opens without tools for quick internal access. Front-panel connectivity includes USB 2.0, USB 3.0 and audio jacks. Two internal 3.5-inch bays and three 2.5-inch bays provide storage flexibility. Builders who need more than one pre-installed fan, integrated RGB control or a USB-C front port will need to add those separately.

Kohokohdat

  • Showcase your build through a scratch-resistant tempered glass side panel with hinged tool-less entry
  • Fit ATX, mATX and Mini-ITX boards in a compact 17.91 x 7.87 x 14.88 inch mid-tower with seven expansion slots
  • Channel fresh air to CPU and GPU via perforated front mesh and side vents plus a pre-installed 120mm rear exhaust fan
  • Install graphics cards up to 325mm, CPU coolers up to 160mm and front radiators up to 360mm for high-end builds
  • Keep the interior tidy with a hidden PSU shroud and three 2.5 inch plus two 3.5 inch drive bays

Tekniset tiedot

Motherboard CompatibilityATX
Power Supply MountedBottom
ColorBlack
Case MaterialSteel / Plastic
TypeATX Mid Tower
Side PanelTempered Glass Panel
Front PortsUSB 2.0 / USB 3.0 / Audio / Controls
120mm Fans1
Pre-installed FansRear - 1 x 120mm
BrandZALMAN
ModelFit-Basic-BK
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays3
Expansion Slots7
FeaturesATX Mid-Tower, Includes 1 x 120mm fan

Kysymyksiä tästä tuotteesta

Will my existing ATX motherboard and 325mm GPU fit in the Fit-Basic-BK without clearance issues?

The chassis supports ATX, mATX and Mini-ITX boards, seven expansion slots, graphics cards up to 325 mm long and CPU coolers up to 160 mm tall, so standard ATX parts fit with room to spare.

How can I confirm the pre-installed 120mm rear fan is spinning correctly after I power on the system?

Connect the fan to a PWM header, boot the PC and verify RPM in BIOS or monitoring software; the perforated front mesh and side vents should pull cool air through while the rear fan exhausts it.

Which drive brackets and mounting hardware are included, and do I need extra screws for 2.5-inch SSDs?

The case provides two internal 3.5-inch bays, three 2.5-inch bays and standard mounting screws; no additional hardware is required for either drive size.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.