Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black mid-tower ATX case with curved tempered glass side panel

Zalman

Zalman P60 ATX Mid-Tower PC Case Black

SKU CH-QH3H-PXY91

ATX mid-tower case with 5 pre-installed 120mm fans, curved tempered glass side panel, 360mm radiator support, 435mm GPU clearance and front USB Type-C

  • ColorBlack
  • Motherboard CompatibilityATX, Micro-ATX, Mini-ITX
  • Side PanelCurved Tempered Glass Side Panel
  • 120mm Fans5
  • Side Air ductYes

Options P60 Black

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Ready airflow with 5 pre-installed 120mm fans
  • Curved tempered glass panel displays your build tool-free
  • 360mm radiator support on top or bottom
  • Fits graphics cards up to 435mm and CPU coolers to 170mm
  • Front USB Type-C plus 2x USB 3.0 and HD audio

Built for airflow-first ATX builds

The Zalman P60 is an ATX mid-tower case that ships with five 120mm fans already mounted, three on the side and two at the rear. A curved tempered glass side panel gives a clear view of the interior while a steel frame keeps the structure rigid. It fits ATX, mATX and Mini-ITX motherboards and provides seven PCI expansion slots for add-in cards.

Upgrading from a case with limited cooling

Builders moving from a chassis that only fits one or two fans will notice the immediate airflow advantage of the pre-installed array. The jump is worth it when a 360mm radiator is planned for the top or bottom, or when a graphics card up to 435mm long and a CPU cooler up to 170mm tall must fit without clearance compromises.

Straightforward assembly with one common snag

The glass panel is tool-less, so it lifts off without screws, and the front I/O includes USB Type-C, two USB 3.0 ports and HD audio for easy connectivity. Drive installation uses four bays: one combo 2.5/3.5 inch, one dedicated 2.5 inch and two 3.5 inch trays. The main issue installers report is routing thick power cables behind the motherboard tray when a 360mm radiator occupies the top, because the space above the board becomes tight.

Kohokohdat

  • Ready airflow with 5 pre-installed 120mm fans
  • Curved tempered glass panel displays your build tool-free
  • 360mm radiator support on top or bottom
  • Fits graphics cards up to 435mm and CPU coolers to 170mm
  • Front USB Type-C plus 2x USB 3.0 and HD audio

Tekniset tiedot

BrandZALMAN
SeriesP
ColorBlack
Motherboard CompatibilityATX, Micro-ATX, Mini-ITX
Side PanelCurved Tempered Glass Side Panel
120mm Fans5
Side Air ductYes

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What motherboard sizes and drive bay count does the Zalman P60 support?

The case fits ATX, Micro-ATX, and Mini-ITX boards and provides four drive bays: one combo 2.5"/3.5", one dedicated 2.5", and two 3.5" bays.

How are the five pre-installed 120mm fans oriented, and what is the common mistake during setup?

Three fans pull air in from the side and two push air out the rear; the step people miss is checking that all fan cables are seated on the motherboard or hub before closing the curved glass panel.

What cooler and radiator limits should I plan for when upgrading the Zalman P60 later?

CPU coolers up to 170mm tall and radiators up to 360mm on the top or bottom are supported, so any future AIO or tower cooler must stay within those dimensions.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.