Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Gray graphics card with three fans and metal backplate

ZOTAC

ZOTAC GeForce RTX 4070 Ti SUPER SOLID OC 16GB graphics card ZT-D40730RC-10P

SKU CH-AFCS-HMCQF MPN ZT-D40730RC-10P

Refurbished RTX 4070 Ti SUPER with 16 GB GDDR6X, 8448 CUDA cores and IceStorm 2.0 triple-fan cooling

  • InterfacePCI Express 4.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 40 Series
  • GPUGeForce RTX 4070 Ti SUPER
  • Boost Clock2640 MHz
  • CUDA Cores8448
  • Boost clock of 2640 MHz accelerates frame rates in demanding games
  • 16 GB GDDR6X memory at 21 Gbps handles large textures and high resolutions
  • IceStorm 2.0 triple-fan cooler with FREEZE Fan Stop keeps thermals low and noise down
  • PCI Express 4.0 interface and 256-bit bus deliver high bandwidth for modern GPUs
  • Four display outputs including HDMI 2.1a and three DisplayPort 1.4a support multi-monitor setups

Built for 1440p and 4K gaming

The ZOTAC GeForce RTX 4070 Ti SUPER SOLID OC delivers 16GB of GDDR6X memory on a 256-bit bus with an effective 21 Gbps clock. The Ada Lovelace GPU provides 8448 CUDA cores and a 2640 MHz boost clock. It connects through a PCI Express 4.0 interface and draws up to 295W through a single 12-pin power connector. A 700W power supply is recommended for stable operation.

Step up from 10GB or 12GB cards

The jump to 16GB removes the frame-buffer ceiling that appears in modern titles at 1440p ultra or 4K with high texture packs. Extra capacity also benefits creative workloads that exceed 10GB or 12GB limits. If your current GPU hits memory limits or cannot sustain target frame rates in modern ray-traced scenes, this card clears that bottleneck.

Fits a standard ATX build

The card measures 337 mm long and occupies 3.5 slots, so verify case clearance and motherboard spacing before installing. IceStorm 2.0 cooling uses three 100 mm fans with FREEZE Fan Stop and Active Fan Control, backed by a metal backplate and a bundled GPU support stand. Outputs include one HDMI 2.1a and three DisplayPort 1.4a connectors for up to four displays at 7680 x 4320 resolution.

Kohokohdat

  • Boost clock of 2640 MHz accelerates frame rates in demanding games
  • 16 GB GDDR6X memory at 21 Gbps handles large textures and high resolutions
  • IceStorm 2.0 triple-fan cooler with FREEZE Fan Stop keeps thermals low and noise down
  • PCI Express 4.0 interface and 256-bit bus deliver high bandwidth for modern GPUs
  • Four display outputs including HDMI 2.1a and three DisplayPort 1.4a support multi-monitor setups

Tekniset tiedot

BrandZOTAC
SeriesSOLID
ModelZT-D40730RC-10P
InterfacePCI Express 4.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 40 Series
GPUGeForce RTX 4070 Ti SUPER
Boost Clock2640 MHz
CUDA Cores8448
Effective Memory Clock21000 MHz (21 Gbps)
Memory Size16GB
Memory Interface256-Bit
Memory TypeGDDR6X
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI1 x HDMI 2.1a
DisplayPort3 x DisplayPort 1.4a
ColorGray
Max Resolution7680 x 4320
Virtual Reality ReadyYes
CoolerTriple Fans
Thermal Design Power295W
Recommended PSU Wattage700W
Power Connector1 x 12-Pin
HDCP ReadyYes
Max GPU Length337 mm
Slot Width3.5 Slots
Lähetyspaino2.00 kg
Pakkauksen mitat427 × 292 × 102 mm

Kysymyksiä tästä tuotteesta

What case clearance and power supply do I need for the 337 mm, 3.5-slot card with a 295 W TDP and 12-pin connector?

Allow at least 337 mm length and 3.5-slot width in your case, and use a 700 W or larger PSU with a native 12-pin cable or the supplied adapter.

How do I install the bundled GPU support stand so the triple-fan cooler does not sag?

Mount the card in the PCI Express 4.0 slot, connect the 12-pin power, then adjust the stand height until it touches the metal backplate before tightening the thumb screws.

When should I clean the IceStorm 2.0 cooler or replace its thermal paste?

Blow dust from the three 100 mm fans and heatsink every 6 to 12 months; re-paste only if GPU temperatures rise noticeably above stock levels after years of use.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.