NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
ZOTAC
Blackwell GPU with 4608 shaders, 16 GB GDDR7 at 28 Gbps on a 128-bit bus, 2587 MHz boost, PCIe 5.0 x8, triple DP 2.1b plus HDMI 2.1b, 2.5-slot dual-fan cooler, 180 W TGP
The ZOTAC VESPERA GeForce RTX 5060 Ti 8GB graphics card is built on the NVIDIA Blackwell architecture. It features 4608 streaming processors and a core clock of 2587 MHz. The board carries 16GB of GDDR7 memory across a 128-bit bus running at 28 Gbps. It connects via a PCI Express 5.0 x8 interface and is rated for 180W power draw.
The card measures 238mm by 120mm by 41mm and occupies 2.5 slots inside the chassis. It requires a 600W power supply and a single PCI-E 8P power connector. Three DisplayPort 2.1b outputs with UHBR20 and one HDMI 2.1b connector support quad display at up to 7680 x 4320 resolution. DirectX 12 Ultimate and OpenGL 4.6 are supported on Windows 10 64-bit 1809 or Windows 11.
A printed manual is the only accessory bundled in the box. No additional cables, adapters or software media are supplied. The dual-fan Ice Mirror copper base cooler is integrated onto the card itself. Installation is limited to mounting the board and connecting the required power lead.
| Brand | ZOTAC |
|---|---|
| Series | VESPERA |
| Model | RTX5060 Ti 8GB VESPERA |
| Chipset Manufacturer | NVIDIA |
| GPU Series | 5060ti |
| Architecture | Blackwell |
| Core Clock | 2587 MHz |
| Memory Type | GDDR7 |
| HDMI | 1 x HDMI |
| DisplayPort | 3 x DisplayPort 2.1b |
| Max Resolution | 7680 x 4320 |
| Card Dimensions (L x H) | 238mm x120mm x41mm |
| Slot Width | 2.5 Slots |
The card has a rated power consumption of 180W and the manufacturer recommends a 600W power supply. It uses a single PCI-E 8P connector for auxiliary power.
The Ice Mirror design uses a copper base and dual fans to dissipate heat across a 2.5-slot frame measuring 238mm x 120mm x 41mm.
The board requires one PCI-E 8P connector. A 600W supply is the recommended minimum to support the 180W board power.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?