Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120 mm square axial fan 38 mm thick all-metal frame two-wire AC connector

Zyvpee

Zyvpee 4600N-466 120x38mm 115V AC case fan

SKU CH-A615-EBA65

120 × 38 mm AC axial fan delivering over 80 CFM at 40–45 dBA on 115 V power

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Air Flow>80 CFM
  • Noise Level40 - 45 dBA
  • Power Connector2 wires
  • High airflow above 80 CFM for effective case cooling
  • AC powered at 115 V 50/60 Hz with simple two-wire connection
  • Ball bearing construction for durable long-term operation
  • All-metal housing provides robust structural integrity
  • Noise level between 40 and 45 dBA for moderate acoustic output

Zyvpee 4600N-466 AC Axial Fan

This 120 mm square fan runs directly from 115 V AC mains at 50 Hz or 60 Hz. It is built for industrial enclosures and server chassis that already provide a high-voltage supply. The two-wire lead connects straight to line voltage without an external adapter. Buyers who need a low-voltage PWM or DC fan for a standard motherboard header cannot use this unit.

All-Metal Construction and Ball Bearing

The frame and impeller are all metal, giving a rigid structure that resists vibration in continuous operation. A ball bearing supports the rotor for long life at the rated speed range. Two flying leads exit the housing, so the installer must provide a safe mains-rated connection and strain relief. There is no standard four-pin or three-pin connector for motherboard control.

80 CFM at 40 to 45 dBA

Airflow exceeds 80 CFM while the acoustic output stays between 40 dBA and 45 dBA. This single figure determines whether the cooling capacity matches the thermal load of the target enclosure. The fan measures 120 mm by 120 mm by 38 mm and carries the series code 4600N-466.

Kohokohdat

  • High airflow above 80 CFM for effective case cooling
  • AC powered at 115 V 50/60 Hz with simple two-wire connection
  • Ball bearing construction for durable long-term operation
  • All-metal housing provides robust structural integrity
  • Noise level between 40 and 45 dBA for moderate acoustic output

Tekniset tiedot

Series4600N-466
Model4600N-466
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Air Flow>80 CFM
Noise Level40 - 45 dBA
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesAC Axial Fan
Dimensions120mm*120mm*38mm

Kysymyksiä tästä tuotteesta

What voltage and frequency does the 4600N-466 AC fan require?

The fan runs on 115 V AC at 50 or 60 Hz single-phase mains power, so it connects directly to a standard wall supply without a DC converter.

Will the 120 mm by 38 mm frame fit my case's 120 mm mount?

Yes, the 120 mm square frame matches standard 120 mm mounting holes, but the 38 mm thickness needs a case that can accept a 38 mm deep fan.

How do I wire the two-wire lead safely?

Connect the two leads to 115 V AC line and neutral, observing any polarity marking on the housing, and secure the fan with four screws before powering on.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.